Examples of 'knurled screw' in a sentence
Meaning of "knurled screw"
knurled screw - This phrase refers to a type of screw that has a knurled or textured surface on its head. The term 'knurled' indicates that the screw is designed with a patterned or ridged surface, often resembling a series of small, raised bumps. This texture allows for easier grip and manipulation of the screw using fingers or tools. Knurled screws are commonly used in applications where manual adjustment or tightening is required
How to use "knurled screw" in a sentence
Basic
Advanced
knurled screw
Hold knurled screw base of elastic suspension firmly.
The spacing of the brushes is adjustable by a knurled screw.
Turn knurled screw c so far clockwise till a resistance is felt.
Rotary knob with knurled screw.
Tighten the knurled screw and recheck the balance.
Column by tightening up the knurled screw.
Then retighten the knurled screw of the depth stop.
Remove tip and tip housing by untightening knurled screw.
Pull out the knurled screw and fold over.
Align the air nozzle pipe and tighten the knurled screw.
Turn the knurled screw of the flash unit upwards toward the flash unit.
To secure the column tighten the knurled screw C.
Wall fitting on rail Knurled screw screwed on the plate.
Hold knurled screw base of elastic suspension firmly ; unscrew trans.
Fine adjustment with the knurled screw 7 is possible.
See also
Use the knurled screw supplied to fix the cradle to the Dock Box chassis.
For balancing, loosen the knurled screw on the counterweight.
Turn knurled screw c counter-clockwise till the stop.
On models so equipped, remove the knurled screw in the front of the oven bottom.
The knurled screw 92 has its transverse plane substantially in the sagittal plane.
Now remove the feed hopper by loosening and removing the knurled screw 1.
Turn the knurled screw 8 downwards in order.
The auxiliary handle 3 can be screwed to the machine with the integral knurled screw 4.
To do this, simply turn the knurled screw 5 when the lever is in a detent position.
If not, readjust the saw table setting at the knurled screw 4.
To lift the brake the knurled screw has still to be turned further approx . ½ rotation.
In addition to, it is kind of Knurled Screw Standoff.
An oval container with a knurled screw propel-repel mechanism is employed to control a screw-type piston.
The term “ crown ” is due to the shape of this knurled screw.
Adjustment of the knurled screw on R-Touch holder 3.
They are bolted to the mount, which, in turn, is fastened with knurled screw.
Please note that the knurled screw 4 must alsways be loosened in operation!
Unscrew front grille counter-clockwise ; the knurled screw base of the.
Loosen the knurled screw 3 and insert the air nozzle pipe 1 into the.
Insert the stage in the dovetail guide and fasten with the knurled screw 5a.1.
To do so, turn open the knurled screw three revolutions, starting from Position 1.
The removable additional handle ( 3 ) can be screwed onto the machine with the integrated knurled screw 4.
Loosen the knurled screw [ A ] by turning it counterclockwise.
Secure the motor head by turning the knurled screw [ A ] clockwise.
Tighten knurled screw ( C ) and then fi rmly close tension screw lever ( A ) according to illustration.
To adjust, turn the knurled screw 8.
Knurled screw for cutting depth limiter 28.
This plate is retained by a knurled screw 18 and positioned by means of a pin 19.
A knurled screw 92 is captive in a fork 93 mechanically connected to the shell 30 of the helmet.
To pre-select the speed turn the knurled screw ( 3 ) on the switch.
Fasten the parallel guide 20 to the routing base with the knurled screw 19.
The handle also incorporates a knurled screw in the shell of the knife (para. 28).
Fasten the roller guide 22 to the routing base with the knurled screw 19.
The incline of the objects can be locked in place using the knurled screw 49.2.
