Examples of 'lens cover' in a sentence
Meaning of "lens cover"
A lens cover is a protective device or accessory used to cover or shield the lens of a camera, microscope, or other optical equipment. It helps prevent dust, dirt, scratches, or other damage to the lens, thus ensuring the clarity and quality of the captured images or observations. Lens covers can be detachable, hinged, or built-in, depending on the specific device
How to use "lens cover" in a sentence
Basic
Advanced
lens cover
The lens cover is removed at lens adjustment.
Can not remove lens cover on light.
The lens cover can not be removed.
Manual operation button of the lens cover.
Insert the lens cover until it clicks.
Your camcorder is turned on and the lens cover is opened.
Replace lens cover by hooking plastic tabs into.
If the upper half of the lens cover is not se.
Lens cover prevents dust incursion.
Do not operate without lens cover assembly attached.
A lens cover protects the lens from impact.
Be sure the lens cover is removed.
Check that nothing is blocking the auto lens cover.
Rotate the lens cover counterclockwise.
Do not operate oven without bulb and lens cover in.
See also
Rotate the lens cover open.
Remove lens cover by pulling cover toward center of tumbler.
Sensor tip with lens cover cap removed.
Take care not to stain or strike on the lens cover.
Wrist and lens cover straps.
Lower handle to remove two screws from lens cover.
Replace the lens cover when not in use.
Lens cover present.
They left the lens cover on.
Replace lens cover by squeezing cover and inserting tabs.
Remove the lens cover.
Attractive lens cover protects light bulbs and diffuses light.
This will automatically force the lens cover to dislodge.
Remove the lens cover from the faucet base.
Do not project an image with the supplied lens cover attached.
Support the glass lens cover to prevent it from falling.
Open the smart stand by moving its lens cover down.
Gently press the lens cover to the closed position.
In particular abrasive cleaning agents seriously damages the plastic lens cover.
Remove the lens cover from the camera lens.
Reinstall the screw into the lens cover screw hole.
Slide the lens cover back into the faucet base.
Look at the lens cover.
An annular lens cover holder is removably attachable to the lens housing.
Do not operate the light without lens cover assembly attached.
Replace lens cover by squeezing cover and inserting tabs into slots.
The system is equipped with a lens cover to hide the camera.
Open the lens cover and insert a lamp into the fitting.
This unit does not come with a lens cover and lens cap.
Attach a new lens cover for every reading for hygienic reasons.
Use a small flat blade screwdriver to remove the lamp lens cover.
Microscope drape lens cover system and assembly method.
Insert and tighten the screws that secure the glass lens cover.
Be sure to remove the lens cover before turning on the projector.
Be careful that your fingers or other objects are not pinched by the lens cover.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Lens
Show more
Lens changing instructions for lazer eyewear
The surface of the lens is very delicate
Keep lens filters out of reach of children
