Examples of 'lift switch' in a sentence
Meaning of "lift switch"
A lift switch, also known as an elevator switch, is a device used to control the movement of an elevator or lift. It is typically located inside the elevator car and allows passengers to select their desired floor or level. The lift switch usually consists of buttons labeled with different floor numbers, allowing users to easily indicate their destination
How to use "lift switch" in a sentence
Basic
Advanced
lift switch
Using the signal ground lift switch.
Ground lift switch for separating the signal ground.
This is especially effective when combined with the ground lift switch.
The ground lift switch allows eliminating noise loops.
In case of a ground conflict set the ground lift switch to GND LIFT.
Ground lift switch that disconnects signal ground from protective earth.
Each output has its individual ground lift switch on the rear of the device.
Ground Lift switch to disconnect signal ground from chassis ground.
If your equipment hums despite this precaution, the Ground Lift switch can be a great help.
Ground Lift switch against humming.
If you can not pinpoint the cause of the hum, press the Ground Lift switch.
To turn saw on, lift switch lever by pinching side walls and pulling up.
Transformer-balanced outputs XLR/m with ground lift switch.
Ground lift switch position GND, signal ground and housing ground.
In normal operation, keep the Ground Lift switch in the depressed position.
See also
The lift switch 330 may indicate when the planter is not in an operating position.
This ground loop can be interrupted with the ground lift switch 19.
At this time, the filter lift switch 16 of the remote controller A is turned on.
XLR / f parallel connectors on the front and rear - transformer balanced, ground lift switch.
The lift switch 21 is connected to the power distribution box 15.
If you encounter low-frequency hum, activate the Ground Lift switch.
To open up this ground loop, set the ground lift switch ( 19 ) to position LIFT.
The power distribution box 15 is also connected to a lift switch 21.
To avoid hum loops, at the equalizer a ground lift switch ( 19 ) is provided.
One of the same type 19 Ground lift switch.
One wire may be provided for the lift switch 330.
To separate the ground loop thus occurring, set the ground lift switch ( 16 ) to position LIFT.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Lift
Show more
Do not lift lever during brewing cycles
Maybe this will lift your spirits
Lift both guard barriers to their up locked po
