Examples of 'light cover' in a sentence
Meaning of "light cover"
The phrase 'light cover' can have different meanings depending on the context. It can refer to a type of protective covering or shade that allows some light to pass through. It can also describe a thin layer or coating that is applied to something, such as paint or makeup, resulting in a light or sheer appearance
How to use "light cover" in a sentence
Basic
Advanced
light cover
Unscrew the light cover securing screw.
Loosen the screws securing the light cover.
Pull the light cover straight down.
The maximum rating is shown on the light cover.
Unscrew the light cover securing screws.
Unscrew and remove the glass light cover.
Replace glass light cover onto light assembly.
Very effective against soft targets in light cover.
Snap light cover and assembly into place.
Pinch both sides of light cover to remove.
The light cover a larger area with more.
Screw the glass light cover into place.
Remove the screw that secures the light cover.
Replace the light cover and mounting screw.
Remove the metal terminals fixing the light cover.
See also
There are light cover around e.
The headlight includes a first bulb and a light cover.
Remove glass light cover by grasping the front edge.
Replace the fixing screw at the front of the light cover.
Pinch tabs on light cover and pull straight down.
Remove the convex part of the light cover from the.
Move the light cover in the direction of the arrow.
Replace the microwave oven light cover by carefully.
The light cover may only be removed by customer service staff.
Support the glass light cover with two fingers to.
Insert the screw into the hole in the oven light cover.
The antlion hides under a light cover of sand or earth.
Hold light cover at top and bottom and pull off.
Sheets for light cover.
Replace the light cover by sliding it into its original position.
The ant lion hides under a light cover of sand or earth.
The light cover must be in place when using the oven.
Pinch both sides of the light cover to snap into place.
Remove light cover from light assembly and set aside.
Do not use cleaning cycle if oven light cover is not properly in place.
The light cover covers a front portion of the first bulb.
Remove the screw from light cover and lower the cover.
Gently twist the screwdriver blade to loosen the glass light cover.
Preferably the light cover is an aircraft exterior light cover.
The two locking clips may fall from the glass light cover.
Be sure to let the light cover and bulb cool completely.
The front cover includes a bottom cover located below the light cover.
Head light cover.
Do not remove the LED light cover.
Place the light cover in its place and plug the unit.
Remove the screw at the front of the light cover and lower the cover.
Replace glass light cover by placing the cover into the clips.
Loosen the screw to open the Cooktop Light Cover.
Reattach the light cover and fasten the screw as shown in fig.
Replace cover screws, light bulb and light cover.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Light
Show more
Put light items in the upper basket
The stash went on a light plane headed north
In light of new or changed risks or vulnerabilities and
