Examples of 'lock screw' in a sentence
Meaning of "lock screw"
This phrase refers to a type of fastening mechanism or device used to secure or tighten objects with screws. It typically consists of a screw with a built-in lock or a separate locking mechanism that prevents the screw from loosening or coming undone. The phrase is often used in engineering, construction, or manufacturing contexts where the stability or security of fastened objects is important
How to use "lock screw" in a sentence
Basic
Advanced
lock screw
Remove lock screw and remove lid.
Gently retighten the lens lock screw.
Lock screw of the track arm loosened.
Reinstate and tighten lid lock screw.
Loosen the lock screw of the air shutter.
Secure the knob with the lock screw.
Screw in the impeller lock screw counterclockwise to tighten.
Lock screw of the material stop.
Tighten air shutter lock screw after adjusting.
Lock screw is tightened in both parts of the flexible coupling.
You may install each saddle lock screw in.
Attach the lock screw to the top of the tube.
Loosen the lens lock screw.
Loosen the lock screw for the focus ring.
Locate and remove one metal bracket lock screw.
See also
Retighten the lock screw for the focus ring.
Place the calibrator and tighten the lock screw.
Dirt collects behind the lock screw of the dirt trap.
Loosen the lock screw on the air shutter located at the rear of.
Lastly add the fifth lock screw and tighten.
The rotating table can be turned after loosening the lock screw.
Loosen air shutter lock screw and open or close air shutter.
Remove the temperature adjustment knob after unscrewing the lock screw on the top.
Tighten the tilting lock screw again after tilt angle adjustment.
Please fix the ideal position of the spikes by using the lock screw again.
Remove the rotor nut lock screw and completely loosen the rotor nut.
The engagement of the spring with the ratchet teeth prevents the lock screw from loosening.
Do not overtighten the lock screw so you can adjust the lens units later on.
Continuous smooth tilt, with accessible lock screw.
Pull lock screw out of size bar slot so roll pin will bypass slot.
Foscusing hood lock screw.
Loosen the stage lock screw and pull the stage forward to the desired position.
Fully loosen the tripod collar lock screw 1.
The lock screw is then screwed into the lock screw opening in the support block.
Loosen the Leg Length Lock Screw on the bottom of the tool.
The reel is immobilized on the roll by means of lock screw 8.
D Slide the zoom lock screw to an appropriate position and tighten it.
To rotate the microscope head, loosen the head lock screw.
Loosen air-shutter lock screw and open or close air shutter as required.
Lock the camera tilt by slightly tightening the lock screw 2.
A lock screw is configured to threadingly engage and, extend through the screw opening.
The bone screw is a taper lock screw that can be mono-axial or multiplanar.
Extract the stove completely towards the front, securing it with a lock screw on either side.
The multi-planar taper lock screw has a novel configuration that includes a proximally located easily accessed flange.
Re-tighten the zoom puller and the lock screw for the focus ring.
Loosen lock screw at transmitter pedestal using 5 mm Allen key.
At the desired distance, tighten the lock screw to secure the straight guide in place.
Set the camera to its extreme distant-focus position by loosening the lock screw for the.
Loosen the lock screw for the second speed fig . A.
Insert a USB cable into the unit, and fix with a lock screw.
