Examples of 'lock washer' in a sentence
Meaning of "lock washer"
A lock washer is a type of washer with twisted or uneven sides that provides added resistance to loosening, commonly used in mechanical applications
How to use "lock washer" in a sentence
Basic
Advanced
lock washer
Lock washer is positioned under head of bolt.
Pull on the lock washer to be sure it is.
Remove igniter cover and lock washer from.
Put a lock washer on each of the muffler screws.
Reinstall and tighten lock washer and hex nut.
Lock washer and remove the nut and washer.
Place the mounting bracket above the lock washer.
Place lock washer on axle bolt.
Stainless steel lock washer.
Slide lock washer down threaded section and thread stem nut on.
Bolts and tighten with lock washer and wing nuts.
Close the cover and fi x it using the screw with the lock washer.
Toothed lock washer.
Secure the blower using the screw and lock washer.
Remove wing nut and lock washer on opposite end inside unit.
See also
The sensor is to be secured with the jam nut instead of the lock washer.
Place the flat washer and lock washer on the hex head.
Secure the motor to the hood with the machine screw and lock washer.
Remove the hex nut and lock washer from the switch cap.
Secure the assembly to the reflector bolt using the acorn nut and lock washer.
Thread the inner nut and lock washer onto the the trolley shaft.
Add carriage bolts from the inside and secure each with a lock washer and nut.
Remove hex nut and lock washer from threaded rod on light kit fitter.
Secure to the threaded stud using the existing lock washer and wing nut.
Place nut and lock washer on the inside of the plate frame of the machine.
Secure to the threaded stud using the lock washer and wing nut provided.
Remove hex nut and lock washer from battery power terminal on the starter solenoid.
Fix the motor with screws, spring washer and lock washer.
Remove hex nut and lock washer from battery terminal post on the motor solenoid.
Secure each location with a flat washer, lock washer and nut provided.
Do not omit lock washer and flat washer for screw A.
Attach the pendant cap to the loudspeaker using the eyebolt, lock washer and nut.
Remove the hex nut and lock washer from threaded rod in light kit fitter.
Lock washer A8 each on the left and right side.
Motor bolt Check that the lock washer is properly in place.
A lock washer 44 is preferably provided to secure the bolt against unwanted release from tapped hole.
Remove every other screw and lock washer from top of motor housing D.
The spring lock washer was replaced by a rip-lock washer . The fastener no longer loosens.
Install flat washer, lock washer and wing nut.
Lock washer for crankshafts, pinion.
Use a star-type lock washer to secure the wire.
In The Big Question, Slim proposed to her with a lock washer ring.
Once in place, the lock washer and nut are then tightened.
The back nut 7 has a recess or a space 8 in which a lock washer 9 is provided.
Reassemble hex bolt, lock washer and fl at washer in exact order as shown.
Repeat steps 8 and 9 for second existing hex nut and lock washer on engine vibration mounts.
Remove hex bolt, lock washer and fl at washer se cur ing blade.
Scrape away any paint from this location; use a star-type lock washer to secure the connection.
Next, place lock washer and hex nut onto faucet stud.
When possible, use a nut and bolt with a lock washer to secure the amplifier.
You'll also be interested in:
Examples of using Lock
Show more
Get this lock off the gate
Lock bowl onto base by turning clockwise
Document digital lock concerns and complaints
Examples of using Washer
Show more
Insert washer and thread nut to screw
The following is a guide to using your washer
This pressure washer is designed for cold
