Examples of 'locking screws' in a sentence
Meaning of "locking screws"
This phrase refers to fasteners that are specifically designed to hold components firmly in place, using mechanisms such as threading or other types of locking mechanisms. It implies that the screws are intended to provide stability and prevent unintended movement or disassembly
How to use "locking screws" in a sentence
Basic
Advanced
locking screws
Loosen the two locking screws using.
Locking screws for the mounting brackets.
Tighten both bevel locking screws securely.
Locking screws to secure the power mixer in the compartment.
This applies to the locking screws as well.
Open the locking screws of the technical compartment.
In the preferred embodiment these are locking screws.
Undo the locking screws with the supplied.
Tighten the two locking screws.
Tighten the locking screws to secure the control in place.
Do not overtighten the locking screws.
Screw both the locking screws on the insertion openings.
Prop up tilted roof fan release locking screws.
Put in the locking screws and dress the wound.
Then tighten the locking screws.
See also
Locking screws from below.
Then fasten the locking screws.
Polyaxial locking screws are frequently used as fasteners in implantation fixation systems.
Retighten the two locking screws.
Loosen off the locking screws in succession but do not completely remove.
Carefully loosen and remove the blade locking screws.
Align the camera locking screws and the keyhole slots.
Unscrew and remove the rear cover locking screws.
Tighten the both locking screws again to secure the handle.
Front stock adjusting screws and their locking screws.
Start by loosing the two locking screws at each side of the handle.
Locking screws according to the invention are then inserted in the posterior holes.
It is absolutely necessary to release the locking screws before adjustment.
Rotate the locking screws of the legs and adjust them to the required length.
These screw holes can be for locking screws as described above.
Carefully raise the window to expose the fi ller panel locking screws.
Check that all locking screws are tightened and all clamping levers properly closed.
Close the housing and fasten both locking screws in place.
All the locking screws are preferably oriented axially and tightened in the same direction.
Prior to every cut retighten the locking screws of the stop rails.
Bonds were created by linking components with tubular connectors with locking screws.
The locking screws make use of a locking cap that is screwed into the hole.
Some limited rotational movement about the locking screws is also possible.
Loosen the locking screws for column tilt and set the desired drill angle.
These screw holes are preferably designed for use with locking screws.
Locking screws secure the satellite speakers to the subwoofer cabinet to protect them during transport.
Screw the telescoping rod fi rmly to the base with three locking screws.
Remove the two locking screws and locking brackets from the lower front of the unit.
The plate has a plurality of threaded plate holes for receiving locking screws.
Eccentric locking screws The nozzle return pressure value is indicated by the pressure gauge.
The recon nail has provisions for twin upwardly oblique locking screws.
Caution The transport locking screws must be removed before the Tandberg StorageLoaderTM can operate normally.
You will start by loosening the small locking screws a few turns each.
Loosen both locking screws underneath the Electrobrush with a coin and then remove the roller cover.
Replace the glass lower trim or the glass assembly using the locking screws.
You'll also be interested in:
Examples of using Locking
Show more
I am not locking the dog in the kitchen
Cylinder locks with custom locking system
A sturdy locking mechanism secures the displays
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
