Examples of 'loosening screws' in a sentence
Meaning of "loosening screws"
loosening screws - Refers to the action of making screws less tight by turning them counterclockwise, often part of repair or maintenance tasks involving fasteners or mechanical components
How to use "loosening screws" in a sentence
Basic
Advanced
loosening screws
Extract the heater after loosening screws.
Do not use for loosening screws or bolts that have been overtightened.
The machine is intended for driving in and loosening screws.
When tightening or loosening screws there can be a short period of high reactive forces.
The cordless screwdriver is designed for tightening and loosening screws.
Remove dust chute by loosening screws and bolts.
High reaction torque can briefly occur while driving in and loosening screws.
Tightening and loosening screws Impact driver.
The cordless impact wrench is intended for fastening and loosening screws and nuts.
When loosening screws or nuts, the process is reversed.
High reac tion torque can briefly occur while driving in and loosening screws.
For loosening screws or removing a jammed drill bit, slide.
High reaction moments can occur for brief periods while tightening and loosening screws.
Adjustment is made by loosening screws 2 and turning double chainstitch looper.
Avoid frequent blocking when drilling, tightening or loosening screws.
See also
For loosening screws or removing a jammed drill bit, use reverse rotation.
The angle of the footrest may be individually adjusted by loosening screws 2.
Remove the circuit board by loosening screws from the Samsung Charm 's body.
Set selector switch ( 4 ) to counter clock wise rotation for loosening screws.
For loosening screws or removing a jammed drill bit, use reverse ( counterclockwise ) rotation . u.
Remove control panel ( h ) by loosening screws i.
For loosening screws or removing a jammed drill bit, use reverse ( counter clockwise ) rotation.
Remove the middle hinge ( and relative washers ), by loosening screws B as shown in the figure 3.
For loosening screws use reverse ( counterclockwise ) rotation . u To select forward rotation, push the forward / reverse.
Remove the lower hinge ( and relative washers ), by loosening screws A as shown in the figure.
Conversely, loosening screws 79 reduces to zero the pressure exerted by expandable sector 68.
On some units, the D-handle may be pre-installed, requiring only loosening screws and some adjustment.
For loosening screws or removing a jammed drill bit, turn the forward / reverse switch ( 3 ) to the left.
You'll also be interested in:
Examples of using Loosening
Show more
Check flow by loosening the drain screw
Loosening rusted or tightly fastened nuts and
Hex wrench for loosening control knobs
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
