Examples of 'mitre cuts' in a sentence
Meaning of "mitre cuts"
A term used in carpentry or woodworking to refer to angled cuts made at the ends of two pieces of material, usually at a 45-degree angle. These cuts are commonly used to create a clean and precise joint when assembling frames, moldings, or corners
How to use "mitre cuts" in a sentence
Basic
Advanced
mitre cuts
Recommended for mitre cuts on small work pieces.
Use the sliding carriage for mitre cuts.
We recommend that bevel and compound mitre cuts should not be performed in non-ferrous metals.
Always remove the splinterguard for mitre cuts.
For precision mitre cuts we recommend a saw blade with 60 teeth.
Users are at particular risk when performing horizontal mitre cuts.
For sawing longitudinal, cross and mitre cuts in firmly supported solid wood, plywood, plastic and.
The locking knob must be tightened during mitre cuts.
Rotary table for mitre cuts with a pivoting range of 180.
The vice can be adjusted for square and mitre cuts.
For special mitre cuts ( undercut ) the blade tilt can be increased by 1.5 in both directions.
In crosscut mode the universal fence can be used for mitre cuts.
NC-controlled cutting-angle setting on guide rails enable mitre cuts on very large steel profiles.
Remove the blade guard for working without a dust extractor or when making mitre cuts.
The tool can be used for mitre cuts up to 45.
See also
The dust cover 10 and the splinter guard 22 can not be used when performing mitre cuts.
The positions for length cuts and 45 mitre cuts are preset.
Available in three sizes, they are suitable for straight and mitre cuts.
The angles allow you to create the 45 degree mitre cuts for a perfect fit.
Precision Control can be used for all applications, even for mitre cuts.
Your bandsaw has been designed for sawing straight and mitre cuts in metal.
The base plate 7 can be swivelled by 45 to the left or right for mitre cuts.
Your DEWALT toothed chopsaw can be used for mitre cuts up to 45.
The device is suitable for crosscuts, inclined cuts, mitre cuts.
This DEWALT chopsaw can be used for left and right mitre cuts up to 45.
The table can be rotated to any desired angle between + / - 90 for mitre cuts.
ATTENTION! - Exercise elevated caution for double mitre cuts.
