Examples of 'mitre angle' in a sentence
Meaning of "mitre angle"
Mitre angle is a term used in carpentry and woodworking to describe the angle at which two pieces of material are joined together to form a corner with a 45-degree angle
How to use "mitre angle" in a sentence
Basic
Advanced
mitre angle
Loosen the mitre angle locking screw.
Mitre angle lock knob is not tight.
Loosen the mitre angle lock knob.
Scale for horizontal mitre angle.
The mitre angle is set by turning the rotating table as required.
Lock lever for mitre angle locking.
Set the bevel angle and subsequently set the mitre angle.
Do not set the mitre angle during use.
Turn the rotary table to the desired angle as indicated by the mitre angle pointer.
Select the required mitre angle as previously described.
Tilt the shoe and set the desired mitre angle with.
Tighten the mitre angle lock knob to hold the desired angle.
Set the required mitre angle.
Set the mitre angle to the nearest whole degree desired by aligning the.
Locking key for mitre angle.
See also
Never adjust the mitre angle or bevel angle while the saw is running.
This sawing operation is combining a mitre angle with a bevel angle.
The mitre angle is left / right variable between.
Always make trial cuts with the mitre angle setting first on scrap wood.
The mitre angle can be read from the scale 9.
A compound cut is a cut made using a mitre angle and a bevel angle at the same time.
Adjust mitre angle and bevel angle, if necessary see Preparation and adjustment.
Wrong cutting angle Wrong mitre angle.
Note, A mitre angle protractor scale is incorporated into the machines base to aid setting.
Plunge cutting is possible only with the mitre angle set at 0.
The mitre angle scale must be at 0º.
The cordless band saw is suitable for straight cutting with a mitre angle of up to 45.
A compound mitre cut involves using a mitre angle and a bevel angle at the same time Fig . v.
If the mitre angle indicator is not set to 0, loosen the screw.
Set both the desired bevel angle and / or the mitre angle and lock into position.
The mitre angle “ MTR ”, by which the two workpieces are to be shortened, is calculated.
Always set the mitre angle setting to 0.
The mitre angle can be set in a range from 0 to 45.
It is also possible to set the mitre angle to 48.
The saw has a mitre angle digital readout, providing repeatable accuracy to 0.1 °.
Locking knob for mitre angle 9.
The Mitre Lock ( 25 ) is used to lock the table at the desired mitre angle Fig . F.
Setting the mitre angle fig . D.
The rotary table must be set at ‘ 0 ' mitre angle.
Adjusting the vertical mitre angle to 45º.
Clamping lever for any mitre angle 26.
