Examples of 'mitre gauge' in a sentence
Meaning of "mitre gauge"
Mitre gauge: A tool used in woodworking to guide the cutting of precise angles on a workpiece
How to use "mitre gauge" in a sentence
Basic
Advanced
mitre gauge
Place the mitre gauge on the sliding table.
Align rip fence with mitre gauge slot.
Adjust the mitre gauge profile to be close to the sawblade.
Position the rip fence at one edge of the mitre gauge.
Always use the mitre gauge for cutting off.
Mitre gauge setup shall never be performed when the machine is running.
Please note that the mitre gauge is not suitable and limit strop.
Hold the workpiece flat on the table and against the mitre gauge.
The mitre gauge can be used on either side of the.
Always use either the fence or mitre gauge to position and guide the work.
ALWAYS secure the workpiece firmly against the rip fence or mitre gauge.
Adjust the mitre gauge and set to the desired angle.
NEVER use the rip fence and mitre gauge simultaneously.
NEVER use the rip fence during the same operation as the mitre gauge.
Check that the mitre gauge will pass the saw blade without any.
See also
Insert the anti-bounce device into the socket provided in the mitre gauge.
Carefully slide the mitre gauge into the required slot in the table top.
The mitre gauge can now display all positions up to an angle of 45.
Hold the material and Mitre Gauge with your left hand.
The mitre gauge fence ( I ) is connected to the rotating mitre gauge J.
Into these slots the support of the mitre gauge fence ( I ) can be inserted.
Slide the Mitre Gauge into its ‘ T ' slot and slide it up to the.
Turn the handle clockwise to lock the mitre gauge at the chosen angle . Fig . 32.
Set the mitre gauge to 900 and tighten using the vertical handle.
Attach the auxiliary fence to the mitre gauge with the washers ( 3 ) and screws 4.
Because the mitre gauge groove is a T-type slot, to.
NOTE, When tilting the blade to 45, the mitre gauge handle will hit the blade guard.
You'll also be interested in:
Examples of using Gauge
Show more
And gauge how we might come together
Slide the depth gauge rod backward
Pressure gauge to detect blockage of secondary filter
Examples of using Mitre
Show more
Mitre saw instruction manual before using
Tighten the mitre and bevel locks
Mitre angle lock knob is not tight
