Examples of 'mold cavities' in a sentence
Meaning of "mold cavities"
mold cavities: Refers to the hollow spaces or indentations in a mold where material is poured to create a specific shape or form, commonly used in manufacturing and industrial processes
How to use "mold cavities" in a sentence
Basic
Advanced
mold cavities
And thence into the mold cavities.
The mold cavities can be formed in one or more plates.
The cores are inserted into corresponding mold cavities.
The series of mold cavities is arranged on a circular periphery to define a mold ring.
Pushes the melted plastic inside the mold cavities.
Thus, hold time between mold cavities can be independently optimized.
The core thus stays centered between the mold cavities.
In another example, the mold cavities in the different areas may be different.
Each of these processes may utilize a platen comprising a plurality of mold cavities.
Often such products are formed in discrete mold cavities by injection molding techniques.
The casting solution is dispensed on the mold or into the mold cavities.
In commercial operations multiple mold cavities may be combined in a continuous, high-speed machine.
A plurality of elastomeric grip portions can be simultaneously molded at third mold cavities.
In some embodiments the pressure roll also has mold cavities disposed at its periphery.
Conventional molding operations are typically stationary and have one nozzle feeding multiple mold cavities.
See also
Supporting a plurality of exterior preform mold cavities on a stationary platen ;.
Rubber Injection Molding Steps Rubber is injected through runner system and gates into mold cavities.
Further, there are usually multiple mold cavities in a single mold.
The molded adapters are then allowed to cool and are ejected from the mold cavities.
Said mold cavity half has a plurality of mold cavities on a first face thereof ;.
The cavity mold plates and plate separators form a plurality of mold cavities.
In other tool rolls, the mold cavities may all be provided with the same orientation.
A lower compound viscosity could equate to more mold cavities filled faster.
Thus the mold cavities and their associated elements are rotated immediately beneath the filling device 17.
This allowed air and volatiles trapped in the mold cavities to escape.
The mold cavities were bullet-shaped.
So air would not be trapped inside the mold cavities under the.
In the embodiment illustrated, mold cavities 2 do not extend through the thickness of mold ring 9.
This helps dislodge any chips which may be stuck in the mold cavities.
The mold cavities 330 exhibit generally rectilinear tangential cross-sectional areas along their depths d.
The powder mold releasing agent can decrease the occurrence of such mold cavities.
The mold 10 may include several mold cavities 12 having a complimentary geometry to the desired molded article.
The mold body may comprise a mold wheel carrying the mold cavities on a peripheral edge.
As is easily seen, the mold cavities 20a and 22a are in the shape of tooth brushes.
The fluid, cooked hard candy batch is injected into the resulting mold cavities.
Figures 8A & 8B illustrate mold cavities with different depths.
Figure 15 is a plan view of another tool roll including elongated discontinuous helical mold cavities.
Concurrently, mandrels 98CC and 98DD engage the mold cavities and have layers injected thereon.
The barrels were cut from cardboard applicators and were inserted into the bullet-shaped mold cavities.
The standard deviation of active content in the mold cavities was ∼ 6 %.
Figure 7A is a plan view of a tool roll including circumferential areas with different mold cavities.
Figure 13 illustrates another process using wire-wound tool rolls with mold cavities formed therein.
Each delivery passage 52 is coupled to a respective one of the mold cavities.
Fig.9 shows a molding box in which a plurality of the pressure mold cavities S ′, S ′ are provided.
The supply passage 22 is coupled to each of the mold cavities.
The mandrels 98 on the other stations remain clear of any mold cavities.
The pads 91 are extended to deposit the array of labels to the mold cavities.
The first molding material component is now injected into the mold cavities 20a.
A water temperature setting of 50 F was used to chill the blow mold cavities.
An oil temperature setting of 257 F was used to heat the blow mold cavities.
You'll also be interested in:
Examples of using Cavities
Show more
Irregular cavities on the surface of bronze parts
The mucus in his nasal cavities is frozen
Avoid cavities between insulation and pipes
Examples of using Mold
Show more
They broke the mold on that one
Mold requires high humidity levels to grow
No one wants a mold of their own penis
