Examples of 'mold cavity' in a sentence
Meaning of "mold cavity"
refers to the hollow space in a mold where the material is poured or injected to create a desired shape
How to use "mold cavity" in a sentence
Basic
Advanced
mold cavity
Other mold cavity shapes are also envisioned.
The film is placed in the mold cavity.
The mold cavity is filled by conventional means.
A thermocouple is attached to the mold cavity surface.
Fill the mold cavity with molten metal.
Plastic material is placed in an open mold cavity.
The mold cavity section has a delivery system.
Each cavity half contains a mold cavity.
A mold cavity is filled with a resin.
Both slugs were designed to stand up in the mold cavity.
The mold cavity can have any desired shape.
The tube is inserted to within the mold cavity.
The method of enlarging the mold cavity is not limited particularly.
Stripping the part out of the mold cavity.
This oversize mold cavity naturally produces an oversize dental restoration.
See also
The mold has a mold cavity.
The mold cavity is then heated to sinter the particles together.
The flowable material is cooled in the mold cavity.
Mold cavity temperature.
The two sides fit together to form a mold cavity.
The mold cavity is opened and the molded preform is removed.
The nucleated material is extruded into a pressurized mold cavity.
Injecting plastic into the mold cavity to form the frame.
The shell material is added to the upper mold cavity.
The mold cavity and core side shape is mirrored with part.
Liquid agar is pipetted to fill a mold cavity half full.
The closed mold cavity defines the shape of the part to be molded.
This plane of abutment is normally perpendicular to the mold cavity.
It suffices to provide a mold cavity that is suitable for making separate segments.
Each hook requires its own individual mold cavity.
The mold cavity is created using two hardened tool steel dies.
The method includes forming an opening in a wall of a mold cavity.
The crook portion of the mold cavity tapers continually to its tip.
A mixture of ceramic precursors is inserted to within the mold cavity.
Fiber material is fed to the mold cavity by means of a fiber feed device.
Molten iron is then poured into the mold cavity.
The mold cavity forms the desired shape of the formed element.
Polyurethane chemicals are injected by a mixing head into the mold cavity.
The pressure is hold until the mold cavity pressure starts to decrease.
In rtm process a preformed reinforcement is positioned inside the mold cavity.
The or each mold cavity may be divided over several mold parts.
Only the body projects into the blow mold cavity.
An awkward shape in the mold cavity can constitute an obstacle to such directional solidification.
Removing the finished plastic article from said mold cavity.
The mold cavity comprises a bottom forming part and a sidewall forming part.
Injection molding uses a molten polymer to be injected into a mold cavity.
Here each mold cavity has a mouth on the top of the blow mold.
Shrinkage was calculated relative to the size of the compression mold cavity.
The tooling mold cavity has a cavity eject side and a core side.
The rubber is forced through a small hole into the mold cavity.
