Examples of 'mooney viscosity' in a sentence
Meaning of "mooney viscosity"
Mooney viscosity is a measure of the viscosity or flow resistance of a material, specifically rubber compounds. It is determined using a rotational viscometer known as a Mooney viscometer. The Mooney viscosity test evaluates the resistance of a rubber sample to rotational shear under specified temperature and time conditions. This measurement is commonly used in the rubber industry to assess the processing and flow characteristics of rubber compounds
How to use "mooney viscosity" in a sentence
Basic
Advanced
mooney viscosity
Mooney viscosity is measured as discussed above.
The properties of the mixtures were analyzed by the rheometer and mooney viscosity.
Mooney viscosity gives information on processing and scorch time.
There is no information concerning the Mooney viscosity of the ethylene vinyl acetate copolymer given.
Mooney viscosity and residual silica using various coagulation systems.
Workability The workability was evaluated by a Mooney viscosity.
Mooney viscosity provides a convenient measurement corresponding to the magnitude of molecular weight.
One limitation in processing HNBR is the relatively high Mooney Viscosity.
A higher Mooney viscosity indicates a higher degree of crosslinking.
In general, the plasticity of unvulcanized rubber is expressed in Mooney viscosity.
The Mooney viscosity of these alloys did reflect structural differences.
After a certain period of time, vulcanization starts and the Mooney viscosity increases.
The lower the Mooney viscosity values the better.
The polymer isolated after the termination of the polymerization has a Mooney viscosity of 50.
The Mooney viscosity indicates that processability is higher as the value is smaller.
See also
Moreover, the processability was inferior as can be understood from the high Mooney viscosity.
The Mooney viscosity is measured with respect to the resulting uncured rubber compositions.
Viscosity of the resulting polymer was determined using the following test methods . Mooney Viscosity.
The Mooney viscosity is measured with respect to the resulting uncured rubber composition.
In certain preferred embodiments, the continuous compounder controls the Mooney Viscosity of the masterbatch.
The Mooney viscosity of the thus obtained rubber composition was measured by the above method.
However, the processibility of the rubber becomes more difficult as its Mooney viscosity increases.
High Mooney viscosity resins are noticeably less sticky than their lower viscosity counterparts.
The resulting masticated rubber was measured for amount of gel, molecular weight and Mooney viscosity.
A higher Mooney viscosity means the higher elasticity and the lower plasticity of the rubber.
The greater the resistance of the material to shear, the higher the Mooney viscosity value.
The Mooney viscosity was measured on the composition prepared as in A.
The smaller the index, the lower the Mooney viscosity and the better the processability.
The Mooney viscosity of each of the recovered polymer samples is displayed in Table 5.
Comparative Example 19 showed low catalyst activity and the resulting elastomer possessed low Mooney viscosity.
In fact, Mooney viscosity actually decreased upon aging.
As the styrene, butadiene ratio decreases, the mooney viscosity decreases.
Meanwhile, the smaller Mooney viscosity value indicates a more excellent processability.
The obtained polyether rubber had a Mooney viscosity of 45.
The Mooney viscosity of the obtained rubber composition was measured and found to be 75.
The copolymer exhibits a Mooney viscosity of 30.
When the Mooney viscosity is the same, this value is smaller as branching is larger.
The elastomeric polymer preferably has a Mooney viscosity of at least 20.
The Mooney viscosity of the acrylonitrile-diene copolymer is not considered to be a limiting feature.
Thus, upon aging, there will be only a slow increase in Mooney viscosity.
The antioxidant insures that Mooney viscosity stability is not due to oxidative coupling . Examples.
Less than a 0.1-fold molar excess results in an increase in Mooney viscosity after drying.
The Mooney viscosity and the curing characteristics of the uncured stocks are shown in Table 24.
A method for devolatilizing a polymer having a Mooney viscosity greater than 50, the method characterized by,.
The Mooney viscosity was recorded as the torque when the rotor has rotated for 4 minutes.
Indeed, even modifying the rheology / processability, its Mooney viscosity is not substantially modified.
As to the Mooney viscosity, the smaller the index value, the lower the Mooney viscosity.
The rubber compositions obtained in Examples 31 and 32 exhibited a low Mooney viscosity and a good processability.
The Mooney viscosity was recorded as the torque when the rotor had rotated for 4 minutes.
Also, the acrylonitrile-butadiene rubber having the Mooney viscosity of not less than 25 is preferably used.
You'll also be interested in:
Examples of using Mooney
Show more
Mooney managed the construction of the house
Music can not be coompared with mooney
Mooney now focuses on his visual art
Examples of using Viscosity
Show more
High viscosity materials applied without problems
Effects of polysaccharides on viscosity in the rheology of foods
Its viscosity lets an unctuous consistency reappear
