Examples of 'nozzle cap' in a sentence
Meaning of "nozzle cap"
A nozzle cap generally refers to a protective cover or lid for a nozzle, which is a device used for controlling the flow of liquid or gas. The cap is designed to be placed over the tip of the nozzle to prevent contamination, leakage, or accidental discharge. It is commonly used in various applications, including plumbing, fueling stations, or industrial machinery
How to use "nozzle cap" in a sentence
Basic
Advanced
nozzle cap
Trim tip of nozzle cap for appropriate application.
A stream discharge is effected upon a shifting of the nozzle cap along its axis.
The nozzle cap was removed from service if cracks were apparent.
Begin by removing the nozzle cap and keep it close by.
The nozzle cap is therefore unlikely to detach when the lighter is accidentally dropped.
Always close the nozzle cap when the vacuum.
The nozzle cap movement distance is set on the basis of the measured distance.
The operation of this type of nozzle cap was discussed earlier.
Twist nozzle cap assembly back onto the spray bar.
The nozzle cover is also movable along the longitudinal axis relative to the nozzle cap.
An adjustable nozzle cap can be used to vary the pattern of the fluid dispensed.
Figure 7 is a perspective end view of the nozzle cap.
The adjustable nozzle cap regulates the área of the metering slot entrance ports.
The structure for preventing detachment of the nozzle cap 5 will now be explained.
Grasp the nozzle cap assembly and twist counterclockwise to remove assembly from the spray bar.
See also
The dye-penetrant inspection of the nozzle cap has been performed annually.
The nozzle cap has a transversely extending flange 21 of generally rectangular outline.
Owing to these movement restrictions, the nozzle cap 5 is effectively prevented from detachment.
According to embodiments of the invention, both operations are initiated by depressing the nozzle cap.
The nozzle cap 5 is punched from a metal sheet with a punching machine to have a horseshoe shape.
Always inspect the swirl ring when replacing a nozzle cap and replace both, if necessary.
The nozzle cap may be part of a nozzle assembly of the type disclosed in U. S.
With nozzle tip facing away from tool, screw nozzle cap back onto sausage holder.
The nozzle cap 22 is a generally cylindrical member.
When used in the pen of Figure 1 the conventional nozzle cap is not used.
The nozzle cap has a discharge orifice 65 at the spin chamber.
FIG . 7 is an isometric view of the interior of the nozzle cap.
Moreover, the nozzle cap is of a one-piece molded plastic construction.
Fig . 12 is a bottom view of a nozzle cap of the container.
Nozzle cap 6 has an inner circumferential surface provided with an internal thread 62.
As shown in Fig . 5, the nozzle cap is in one of its OFF positions.
Nozzle cap 48 is secured to the top of nozzle 38, for instance by cooperating threads.
As a result, a gap is formed between the nozzle cap 1 and the nozzle 13.
Thread nozzle cap onto the front of barrel tube Fig . 5.
It is at this moment that the nozzle cap 110 reaches the off-position.
The nozzle cap 110 can be rotated in either direction.
The top plate 22a is unitarily provided at an axially distal end of the nozzle cap 22.
Unscrew nozzle cap ( m ) and remove nozzle n.
Nozzle cover 70 has an annular face 72 thereon which confronts annular face 58 on the nozzle cap.
Hence, the nozzle cap 110 can be located in either position, fast and accurately.
Before delivering foam from the syringe into a patient, the nozzle cap 102 is removed.
The nozzle cap driving bar 2 is coupled with the nozzle-cap-bar drive disc 3.
To clean the sausage holder, unscrew nozzle cap 13 and sausage holder 12 and remove from tool.
Figure 4 is a front elevational view of the nozzle cap of Fig . 3 ;.
When the nozzle cap 110 assumes the position shown in Fig.
Place the nozzle ( n ) onto the sausage holder ( l ) and thread the nozzle cap ( m ) over the nozzle.
Figure 1 ( A ) shows the nozzle cap just before attachment and Figure 1 ( B ) shows it after attachment.
The liquid is directed outwardly from the output nozzle cap 108 through the nozzle opening 122.
FIG . 11 is an elevation view of the interior of the nozzle cap.
To clean the sausage holder, unscrew nozzle cap ( m ) and sausage holder ( l ) and remove from tool.
You'll also be interested in:
Examples of using Cap
Show more
Retighten the cap to the filter housing
Cap and back panel sheet steel
Do not install cap onto water bottle
Examples of using Nozzle
Show more
Replace nozzle and bring in tight to body
Attach the textile turbo nozzle to tubes
Each nozzle can be individually closed or calibrated
