Examples of 'nozzle diameter' in a sentence
Meaning of "nozzle diameter"
nozzle diameter: Refers to the width of the opening in a nozzle, often used in engineering or manufacturing contexts
How to use "nozzle diameter" in a sentence
Basic
Advanced
nozzle diameter
The nozzle diameter is about three times the diameter of the winding wire.
The noise of the impinging jets can be reduced by reducing the nozzle diameter.
A smaller nozzle diameter requires more force to push the caulk and reduces battery life.
These drops are typically smaller than the nozzle diameter at higher burst frequency.
A smaller nozzle diameter provides sharper and more precise cuts with less material loss.
Suspension systems cut far more efficiently relative to the water pressure employed and nozzle diameter.
Examples of such variations in size of the nozzle diameter are illustrated in FIGS.
In other nozzle-mix burners, the improvement was achieved by enlarging the nozzle diameter.
However, such a small nozzle diameter requires low viscosity inks.
Manual application was performed using a syringe with a nozzle diameter of 1 mm.
The ceramic nozzle diameter must be between 4 and 6 times the electrode diameter.
Therefore, avoid printing objects with details smaller than the nozzle diameter.
The nozzle diameter in the tundish was 27 mm.
The " material gas " blowoff nozzle may or may not have a uniform nozzle diameter.
The nozzle diameter of inkjet print heads is usually 20 to 35 µm.
See also
The laterally directed jets 44 typically have a nozzle diameter of about 3 mm.
The print head had a nozzle diameter of 36 microns and a dot frequency of up to 80 KHz.
In general, a Wall Thickness of 2 or 3 times the nozzle diameter is sufficient.
This was determined using a twin-bore capillary rheometer Porpoise P9 with a nozzle diameter of 0.5 mm.
A biphase spray nozzle was used with a nozzle diameter of 0.7 mm.
The upwardly directed oil jets 42 typically have a nozzle diameter of about 7.5 mm.
The solid particles should be smaller than 1/10 of the nozzle diameter to avoid clogging.
Assume the vessel 1 has a diameter of 2 m and the inlet nozzle diameter is 250 mm.
You'll also be interested in:
Examples of using Diameter
Show more
A change in wire diameter results in changed parameters
Diameter of and pressure in the fire mains
The incoming hole diameter on auxiliary terminal
Examples of using Nozzle
Show more
Replace nozzle and bring in tight to body
Attach the textile turbo nozzle to tubes
Each nozzle can be individually closed or calibrated
