Examples of 'nozzle opening' in a sentence
Meaning of "nozzle opening"
10. Nozzle opening: This phrase describes the aperture or opening of a nozzle, which is a device used to control the flow or direction of a fluid or gas. It refers to the entrance or outlet point of the nozzle through which the substance passes or is released
How to use "nozzle opening" in a sentence
Basic
Advanced
nozzle opening
Automatic nozzle opening and closure technology.
Lift brush roll out of nozzle opening.
Nozzle opening at least one millimeter.
Foil for closing nozzle opening strip.
The nozzle opening is preferably at one end of the mixing space.
This sheath is linked with the nozzle opening.
It specifies the minimum nozzle opening time to obtain a given power.
Push the thicker wire through the nozzle opening.
Ensure that the nozzle opening does not become blocked or damaged during cleaning.
An annular valve seat is formed around the nozzle opening.
This has the effect of raising the nozzle opening pressure of the injection nozzle.
The nozzle includes a nozzle body and a nozzle opening.
Do NOT use with nozzle opening blocked.
Align slot in lower handle tube with notch in nozzle opening.
The nozzle opening could nevertheless be of another shape, for instance, circular.
See also
It would not be feasible to fill a tube through the small nozzle opening.
A slit-shaped nozzle opening is in fluid communication with the distribution passage.
The nozzle has four grooves in the wall forming the nozzle opening.
Naturally, each nozzle opening needs to be supplied either with fuel or with oxidant.
The length of the inclined surface beyond the nozzle opening is not critical.
The nozzle opening may also be threaded, in order to enhance the vortex movement.
This function is used for generating droplets at the frequency of nozzle opening and closing.
Bruising also may occur if the nozzle opening ( orifice ) is partially clogged or worn out.
The different lines correspond to the velocity across the height of the nozzle opening.
Therefore, the toner is moved into a nozzle opening of the conveying pipe.
A cleaning member is preferably provided on the trigger to obscure and wipe said nozzle opening.
This can be removed carefully from the nozzle opening by using the cleaning needle 12.
Align endcaps with slots in nozzle base while pulling brush roll towards the nozzle opening.
The mist spray emitted from the nozzle opening 62 comprises a dispersed flow of vapocoolant.
In that context, the pump outlet faces in the direction of the nozzle opening.
The elongated nozzle opening 29 does not produce a high pressure fluid aimed at the separation área.
The suction nozzle is preferably shaped such that the nozzle opening is essentially rectangular.
Furthermore, the nozzle opening 610 needs to arrive at a position at which toner can be received.
Do NOT put objects into nozzle opening.
The liquid supply to the nozzle opening 26 is then not restricted by the device.
Further, the nozzle is configured to discharge a liquid jet through the nozzle opening.
The grooves extend longitudinally along the nozzle opening and are spaced approximately 90 ° apart.
For best performance on hard surface wet pickups, insert squeegee into the bowl nozzle opening.
Restricting the nozzle opening of the VNT increases engine back pressure ( Block B2 ).
The backwash arrangement of claim 1, wherein said nozzle opening has a rectangular form.
The nozzle opening 610 is always open with face up.
The device according to claim 2 wherein the cover comprises a distal opening opposite the nozzle opening.
The nozzle opening was 0.2 mm and dry carbon dioxide was used as the anti-solvent.
Measured 5mm in the nozzle, in the centre of the nozzle opening.
As a result, ink is discharged from the nozzle opening 28 consonant with the ink chamber 22b.
From there the liquid will be ejected through the nozzle opening 112.
The noted nozzle opening 326 has a vertical height preferably equal to the noted second vertical height 328.
The remaining three openings may be configured to have a nozzle opening of about 0.6 mm.
In such a case, the rotating forming unit 30 will not create the nozzle opening.
Optionally primary cleaning nozzle 166 has a larger nozzle opening diameter than do secondary cleaning nozzles 168.
You'll also be interested in:
Examples of using Opening
Show more
I am opening up a new checking account in my own name
In case of accidental opening the cycle stops
Opening of the meeting and address by the
Examples of using Nozzle
Show more
Replace nozzle and bring in tight to body
Attach the textile turbo nozzle to tubes
Each nozzle can be individually closed or calibrated
