Examples of 'nozzle orifice' in a sentence
Meaning of "nozzle orifice"
nozzle orifice - This phrase refers to the opening or hole in a nozzle through which a substance, such as liquid or gas, is emitted
How to use "nozzle orifice" in a sentence
Basic
Advanced
nozzle orifice
Stainless fluid nozzle orifice size.
All product formulations and carriers cause wear of the nozzle orifice.
Multiple nozzle orifice.
Follow the procedure listed below to clean nozzle orifice.
Remove the nozzle orifice and completely submerge spray nozzle in a container of water.
This is accomplished by an appropriate design and machining operations of the nozzle orifice.
This patent discloses a closure cap for the nozzle orifice of a dispensing cartridge.
The channels or pipes are preferably movable across the full width of the nozzle orifice.
The chamber pressure is determined by the nozzle orifice diameter and grain burn rate.
This high pressure results in a high liquid velocity through the nozzle orifice.
The nozzle arrangement has a nozzle orifice associated either with a first or a second component.
The two plates are mounted approximately one fine nozzle orifice diameter apart.
The nozzle orifice aperture has a rectangular or squared cross-section as shown in Figure 3a.
Slight manufacturing variances in the nozzle orifice can result in different liquid flow rates.
After mixing the mixed multi-component thermosettable resin is dispensed from a nozzle orifice.
See also
In a given fuel injector, the nozzle orifice flow área is fixed.
Measurements were made at a distance of 350 mm below the nozzle orifice.
In the present case the nozzle orifice 31 is in the form of a slot.
Normally, the arc column stays co-axial with the nozzle orifice.
The nozzle assembly 12 has a nozzle orifice 18 formed therein as is well known in the art.
Nozzle orifice is the same for the PR and ST series. How do they differ?
Therefore, should the nozzle become clogged, the nozzle orifice must be cleaned immediately.
A second nozzle orifice 43 is provided above nozzle orifice 41.
A control unit 6 " controls the nozzle orifice size.
A nozzle orifice size reference number 68 see for example, FIGS.
In this case, the nozzle tapers off towards the nozzle orifice 26.
The space located between the nozzle orifice 52 and the previous layer 19 is then entirely empty.
On the first component 25 the nozzle arrangement 5 has a rounded region 29 which extends to a nozzle orifice 31.
In conventional designs, the nozzle orifice is typically about 600 microns in diameter.
You'll also be interested in:
Examples of using Nozzle
Show more
Replace nozzle and bring in tight to body
Attach the textile turbo nozzle to tubes
Each nozzle can be individually closed or calibrated
Examples of using Orifice
Show more
Install color coded orifice hoods supplied
A damaged orifice or regulator which requires replacement
Never remove threaded orifice at end of valve
