Examples of 'ohmic' in a sentence
Meaning of "ohmic"
ohmic (adjective) - Relating to or being a kind of electrical resistance that is consistent and constant
Show more definitions
- Of or relating to, or measured in, ohms.
- That obeys Ohm's law
How to use "ohmic" in a sentence
Basic
Advanced
ohmic
Ohmic value related to one of the windings.
Proportional to the ohmic value of the resistor.
The ohmic contacts are also difficult to obtain.
With inductive load ohmic share min.
Which ohmic value grows when temperature.
All load data relates to ohmic loads.
To enable ohmic contact to be obtained with a metal.
Bus bars must make ohmic contact.
These ohmic contacts are formed of nickel.
This type of contact is called an ohmic contact.
Impedance is the effective ohmic resistance of an electronic circuit.
Potentiodynamic studies indicate a process controlled by ohmic resistance.
Only ohmic loads are admissible.
It is also possible that an ohmic contact is formed.
Ohmic heating involves passing an electric current through an element.
See also
Our goal is to develop a good quality ohmic contacts.
Check correct ohmic value in the probe with multimeter.
It involves losses appear as ohmic losses.
Thanks to the removal of ohmic losses specific to metallic materials.
The control voltage is applied to the ohmic contact.
Ohmic value of one resistor.
Small currents reduce ohmic losses.
Also an ohmic heater can be applied for the sterilization.
The curves shown were corrected for ohmic drop.
Ohmic resistance of connection cable to computer has no influence on temperature measurement.
These conductors are called ohmic conductors.
Ohmic collector resistance.
The heating in this experiment was performed by ohmic heating.
This effect is called ohmic or resistive loss see ohmic heating.
Sterilization of heterogeneous products by ohmic heating.
Ohmic emitter resistance.
This reduces the ohmic resistance.
This increase in volume results in a significant reduction in ohmic losses.
Ohmic heating current.
A preferred method of heating is ohmic heating.
The ohmic resistance is a variable proportional to the temperature of the equipment.
The relay allows the switching of ohmic loads at max.
The ohmic overvoltage appears due to the resistance of the electrolyte.
This use of long output waveguides causes ohmic losses.
Apparatus and method for the ohmic heating of a particulate liquid.
These islands reduce the resistances of the ohmic contacts.
So as to ensure an ohmic contact materials of compatible work functions should be used.
Operation in the ohmic regime.
And ohmic values.
A conductor that conforms to this rule is called an ohmic conductor.
They form then an ohmic contact with the electron accumulation layer.
This layer provides only the ohmic contact function.
These ohmic contacts are preferably made of a normal conductive material or a superconducting material.
Determines its ohmic value.
The ohmic modulation mechanism can be implemented by either active or passive configurations.
