Examples of 'ohmic contacts' in a sentence
Meaning of "ohmic contacts"
Refers to electrical contacts or connections that exhibit ohmic behavior, meaning they have a linear voltage-current relationship, according to Ohm's law
How to use "ohmic contacts" in a sentence
Basic
Advanced
ohmic contacts
The ohmic contacts are also difficult to obtain.
Our goal is to develop a good quality ohmic contacts.
These ohmic contacts are formed of nickel.
These islands reduce the resistances of the ohmic contacts.
Metallic coatings provide the ohmic contacts for the different electrodes.
These ohmic contacts are preferably made of a normal conductive material or a superconducting material.
The measurements require that four ohmic contacts be placed on the sample.
Source and drain terminal conductors are connected to the semiconductor through ohmic contacts.
The first and second ohmic contacts being located on either side of the mesa.
This article focuses on metal-semiconductor ohmic contacts.
It is also possible to make ohmic contacts for this semiconductor using conventional techniques.
The last step consists in making the emitter, base and collector ohmic contacts.
The detector includes in addition ohmic contacts located laterally relative to the two quantum wells.
Rosencher and B. Vinter by adopting a geometry with transverse ohmic contacts.
The necessary ohmic contacts can then be made by conventional photolithographic processes and depositing metal.
See also
The second anode and cathode electrodes ( AuGe ) form ohmic contacts with the semiconductor.
The lateral ohmic contacts can be formed by diffusion of indium, for example.
This transistor comprises a source 3 and a drain 4 formed by ohmic contacts.
The emitter ohmic contacts are deposited using the lift-off technique.
The drain and source electrodes 3 and 4 are made by means of ohmic contacts.
Typically, metal electrodes forming ohmic contacts with the p and n regions are used.
Modern ohmic contacts to silicon such as titanium-tungsten disilicide are usually silicides made by CVD.
Metal pads 82 are thereby formed on the ohmic contacts made of metal and semiconductor compound.
Ohmic contacts 48 soldered to the two ends serve to pick up the detection signal.
The source and drain electrodes 3 and 4 are ohmic contacts made of gold.
Depositing metal ohmic contacts on the last epitaxial layer and under the substrate ;.
This process is followed by depositing top ohmic contacts 32 inside the recess 31.
Forming the ohmic contacts of the n-type in the openings of a mask, these openings providing.
The rest of the layer remains and forms the ohmic contacts 81 and 82.
The fabrication of ohmic contacts was then optimized on several P-type and N-type diamond samples.
The N+ islands 41 ensure that the contacts at the terminals 40 are ohmic contacts.
Layer 2 comprises two ohmic contacts S and D, for forming the source and drain electrodes.
Ohmic contacts are made at the two ends of each active layer D1, D2.
Respective ohmic contacts define the source, gate, and drain.
Finally, Ohmic contacts to both the n and p-region may be required to prevent charge build-up.
The ohmic contacts 40 and 48 serve as masks for this hydrogenation.
The ohmic contacts constituting the output 2 are formed first on the surface 12 of the layer 21.
Ohmic contacts at each end form the source ( S ) and the drain ( D ).
You'll also be interested in:
Examples of using Contacts
Show more
Bend contacts back into proper position
He still has a ton of contacts in law enforcement
Move contacts from your previous handset
Examples of using Ohmic
Show more
Ohmic value related to one of the windings
Proportional to the ohmic value of the resistor
The ohmic contacts are also difficult to obtain
