Examples of 'oil filler' in a sentence
Meaning of "oil filler"
oil filler ~ Refers to a device or mechanism used to add or fill oil in a specific container, such as in a car's engine or an oil lamp
How to use "oil filler" in a sentence
Basic
Advanced
oil filler
Reinstall the oil filler cap securely.
There was still no filter in the oil filler.
Oil level oil filler plug.
Oil filler pipe.
Lower edge of the oil filler hole.
Reinstall oil filler cap and tighten securely.
Thread dipstick into oil filler neck.
Insert the oil filler cap and hand tighten.
Final transmission oil filler cap.
Remove oil filler cap on the opposite side of carburetor.
Remove the oil filler cap.
Remove oil filler cap and catch old oil in a container.
Unscrew the oil filler cap.
Remove oil filler cap and check the engine oil level.
Symbols on the oil filler cap.
See also
Plug for oil filler and checking the oil level.
Reinstall and tighten the oil filler cap.
Reinstall the oil filler cap and dipstick.
Upper limit lower edge of the oil filler hole.
Unscrew the oil filler plug with the dipstick.
Unscrew the cap of the engine oil filler opening.
Screw the oil filler cap firmly back in place.
Clean area around the oil filler cap with.
Screw the oil filler plug with the dipstick tight.
Insert the dipstick into the oil filler neck.
Screw back the oil filler cap as far as it will go.
Remove the dipstick from the oil filler neck.
Remove the oil filler cap and the drain bolt.
Insert the dipstick without tightening the oil filler plug.
Insert the dipstick in the oil filler neck without screwing it in.
The alternator is located below the engine oil filler neck.
Make sure dip stick or oil filler cap is securely in place.
Oil filler cap comes shipped with frame or can be ordered as a replacement.
Clean the area around the oil filler cap thoroughly to.
Replace oil filler cap and secure side panel with screws.
Soybean oil filler.
The oil filler cap changed to a longer tube to make filling easier.
Be sure that the engine oil filler cap is tightened securely.
Place the tiller on a level surface and remove the oil filler cap.
Reinstall the oil filler cap and oil level dipstick.
Draw off engine oil via the oil filler neck.
Tighten dipstick or oil filler plug firmly before starting engine.
Check the oil level with the dipstick on the oil filler cap.
Check that the engine oil filler cap is tightened securely.
Fill with the recommended oil to the top of the oil filler neck.
Remove the engine oil filler cap and oil filter.
Drain or suction off all the oil through the oil filler opening.
Unscrew the oil filler cap and add oil up to the.
The oil should be level with the lower edge of the oil filler hole.
Remove the oil filler cap and wipe the dipstick clean.
