Examples of 'overload switch' in a sentence
Meaning of "overload switch"
overload switch - An overload switch is a device or mechanism designed to protect electrical circuits from an excess of current. It functions by automatically cutting off power when the circuit is overloaded, thereby preventing damage or hazards
How to use "overload switch" in a sentence
Basic
Advanced
overload switch
Motor thermal overload switch has tripped.
The pump stops running possible intervention of the thermal overload switch.
Thermal overload switch has been tripped.
Press button of cutout or overload switch again.
The overload switch switches off the power and stops the machine.
The button of the cutout or overload switch may be actuated only.
The pump has locked out through its internal thermal overload switch.
A suitable differential overload switch must be installed upstream of the operator.
The motor of this equipment is protected against overload by an overload switch G.
If there is continuous overload switch the roof fan off immediately.
Overload switch machine with single-phase motor.
Let motor cool off and overload switch will automatically reset.
The motor of this equipment is protected against overload by an overload switch 35.
Check that the overload switch for the feed is working by attempting to hold.
Pump overheated and shut-off due to the thermal overload switch.
See also
Manual Overload switch has been tripped.
Allow compressor to cool for approximately 30 minutes so thermal overload switch will reset.
The thermal overload switch will automatically reset after approximately 15 minutes.
If the rated current is exceeded, the overload switch will shut down the equipment.
After a cooling down period, the machine can be reactivated by pressing the overload switch 16 a.
Make sure the Thermal Overload Switch has not tripped.
Pumps with A.C. motors should be provided with an overload switch.
In this case, push the overload switch after few minute later.
The motor is fitted with an overload switch 18.
By activating the overload switch 6 the sockets 3 can be used again.
Contact opening of 3 mm connect it to a 6 A differential overload switch with sensitivity of 30 mA.
Then press the overload switch ( 18 ) and restart the compressor.
High reliability, Motor protection by thermal overload switch with automatic restart.
Press the overload switch Item12.
If the toy is overloaded, the overload switch will immediately disconnect the power.
Sand, mud, or very uneven ground, the overload switch will immediately disconnect the power.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Overload
Show more
If the overload protector is fitted on the brake
Motor internal thermal overload protector is open
An overload would cause a pretty big explosion
