Examples of 'panel cover' in a sentence
Meaning of "panel cover"
refers to a protective covering or casing for an electrical panel or control panel. It is used to protect the panel from dust, dirt, and tampering
How to use "panel cover" in a sentence
Basic
Advanced
panel cover
Swing control panel cover out to remove.
Reinstall the main distribution panel cover.
Remove the panel cover to access the fuses.
Press to open the front panel cover.
Lift the front panel cover hooks outward.
How to open the control panel cover.
Open the panel cover of the adjustment keys.
Remove the main electrical distribution panel cover.
Slide the security panel cover straight up.
Push this part to open the control panel cover.
Remove the front panel cover held by magnets.
Panel type is printed on panel cover.
Pinch control panel cover at the indicated points.
Reinstalling the front panel cover.
Remove the panel cover to access the fuse cover.
See also
Removing the front panel cover.
Pull the panel cover outward to access the fuses.
To take off the panel cover.
Do not remove a panel cover unless you are a licensed electrician.
Open the connection panel cover.
Open the fuse panel cover located near the door.
Open the control panel cover.
Open the fuse panel cover by sliding the cover straight back toward you.
Remove the two screws on the control panel cover.
Replace control panel cover and attach the.
The date plate is located under the control panel cover.
Push the control panel cover and slide it to open.
Install the filter and then close the panel cover tightly.
The interior of the panel cover door is covered with condensation.
Loosen the screws as illustrated below and take off the panel cover.
The instrument panel cover has a low glare surface which minimizes reflections in the windshield.
You can remove the cover by releasing the connector panel cover lock qf.
Sealed input panel cover and powder coated aluminum grilles for added weather resistance.
To install the Remote Commander in the panel cover.
D DO NOT remove the control panel cover unless the oven is unplugged.
Use a 3mm hex key to remove side panel cover.
For the head version, remove the front panel cover to access the chassis retainer screws.
Fix the video encoder in place, using the screws from the front panel cover.
Oven lamps with a heat-resistant glass panel cover are provided for this purpose.
Note, Only a qualified electrician should remove the front panel cover.
When taking the interior panel cover off, check the fasteners holding that panel in place.
Generator is shown with roof, plastic access cover and control panel cover removed for clarity.
Replace control panel cover and attach the decorative wall plate see Figure 4.
Description: angled patch panel cover.
You do not see the Side Panel cover page shown full-screen in the Map Tour Builder.
Moreover, when not using the projector, close the front panel cover.
Step 1 - Remove the controller 's lower panel cover to access the sensor terminals.
Side cover ( s ) and control panel cover.
Step 3 - Remove the controller 's lower panel cover to access the master valve and station terminals.
Step 4 - Reinstall the lower panel cover.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Panel
Show more
Center the panel on the freezer door
Panel discussion on agriculture and rural development
Replace the panel by reversing this step
