Examples of 'pipe thread' in a sentence
Meaning of "pipe thread"
pipe thread: This phrase refers to the threading or ridges on the end of a pipe that allow it to be connected to other pipes or fittings. It is used in plumbing and pipefitting contexts to ensure a secure and leak-free connection between pipes or components in a system
How to use "pipe thread" in a sentence
Basic
Advanced
pipe thread
Male pipe thread nipple for connection.
Type of coating present on the pipe thread.
Remove the pipe thread protective cap.
The geometric properties of the pipe thread.
Pipe thread lathe sphere turning lathe.
This thread can be pipe thread or machine thread.
Use pipe thread sealing compound when servicing connections.
Replace the correct burner orifi ce using pipe thread compound.
Apply pipe thread sealing tape to the tank fitting.
If it is its a pipe thread.
Male pipe thread nipple for connection to pressure regulator.
Use a pipe dope compound to seal the inlet pipe thread connection.
Apply pipe thread sealant to the gas inlet located.
Do not attempt to attach the flexible connector directly to an external pipe thread.
The pipe thread lathe has been partially digitally controlled.
See also
Wrap the threads with PTFE pipe thread sealant tape.
Install pipe thread sealing tape onto the shower arm.
Apply pipe joint compound made for use with LP gas to all pipe thread connections.
Use a pipe thread compound approved for the type of gas supplied.
Whitworth thread National pipe thread.
Teflon brand tape or other pipe thread compound to seal plumbing connections.
The pipe thread tape is then removed by carefully removing each layer of this tape.
When connecting threaded pipe use pipe thread compound or Teflon tape to seal the connection.
Pipe thread products of pipe threads in European countries are at a disadvantage.
European countries and Commonwealth countries first accepted the British pipe thread standard.
Slide male pipe thread adapter on top of drain pipe positioned within bubble chamber.
Figure 4 schematically illustrates how a multipurpose pipe thread is established ; and.
Use PTFE pipe thread sealant tape on pipe connections.
Always secure threaded connections with non-hardening pipe thread compound.
Use PTFE pipe thread sealant tape on male ends of.
The method of claim 9 wherein said mold has an intaglio pipe thread surface.
Use only PTFE pipe thread sealant tape on joints in plastic pipe.
CAUTION, Do not attempt to attach the flexible connector directly to an external pipe thread.
Use pipe thread sealant that is certified for use with LP gas.
Before connecting range, apply pipe thread compound approved for LPG to all threads.
Use pipe thread sealer compound or Teflon tape appropriate for natural or LPgas.
Before connecting the unit, apply pipe thread compound approved for LPG to all threads.
Use pipe thread sealer compound appropriate for natural or LP gas or use Teflon tape.
Apply pipe-joint compound made for use with LP gas to all pipe thread connections.
Pipe thread sealant certified for LP gas.
In this case, wrap all joints with PTFE pipe thread sealant tape before making connections.
The pipe thread should be cut to obtain 2 to 3 turns hand tight engagement with fitting.
Fig . 4 schematically illustrates how a multipurpose pipe thread is established.
All Pipe thread.
Connect the flexible stainless steel connector to the pressure regulator using a 1/2 " male pipe thread adapter.
Use pipe thread sealant on all threads, and tighten joints thoroughly to prevent air leaks.
Water chuck for diamond drill with drill bush for 13mm pliers for pipe thread.
Apply pipe thread sealant ( paste type ) to external pipe threads.
The hole in the wall needs to have threads made with a 1/2 inch NPT pipe thread.
A multipurpose external pipe thread 23 is cut around the lower end of the tapered surface 21.
You'll also be interested in:
Examples of using Pipe
Show more
Pressure transmission pipe in the combustion chamber
Pipe is the heaviest wave in the world
Two pieces of pipe and a bicycle chain
Examples of using Thread
Show more
Insert washer and thread nut to screw
Thread mount available for optional accessories
Put a spool of thread on the spool pin
