Examples of 'pipe threads' in a sentence
Meaning of "pipe threads"
In plumbing, pipe threads refer to the helical ridges found on the end of a pipe that creates a leak-resistant connection when twisted into a fitting
How to use "pipe threads" in a sentence
Basic
Advanced
pipe threads
Cover pipe threads with leak sealant.
Apply plumber tape to pipe threads on both ends.
One classical usage is as an impervious material of pipe threads.
Seal the pipe threads with an appropriate sealant.
Pipe sealant must be used on all pipe threads.
Black iron pipe threads are used because of their high heat resistance.
Nuts must not be connected directly to pipe threads.
Stop the machine before wiping pipe threads or screwing on fittings.
Use pipe joint compound on all external pipe threads.
Screw the coupling onto the pipe threads until it is hand tight.
Make sure to use pipe joint compound on all male pipe threads.
Cover the pipe threads with pipe joint compound resistant to propane gases.
Use Teflon tape on male pipe threads.
Avoid over tightening the pipe threads when connecting fittings to the pump.
Use Teflon tape for sealing pipe threads.
See also
Inline mixers typically feature pipe threads on both ends to simplify connection to material lines.
Use pipe sealing compound or Teflon tape on the pipe threads.
Pipe fittings made of plastic with female pipe threads are particularly susceptible to structural failure.
Use Teflon Tape on all external pipe threads.
Pipe thread products of pipe threads in European countries are at a disadvantage.
To prevent leaks, put pipe joint sealant on all external pipe threads.
O Sealing compounds for pipe threads and joints.
Wrap male pipe threads with one to two layers of Teflon tape.
NOTE, Pipe sealant must be used on all pipe threads.
Wrap Teflon tape around the pipe threads to ensure a tight seal.
Where pipe threads are used a thread-sealing compound should be used.
Several different types of inch-based pipe threads for pneumatic piping have been known.
German Quality Product Semi-automatic high-performance machine for effi cient cutting of pipe threads.
Connect the 1 in . pipe threads into the smaller opening in the jet body.
Apply pipe thread sealant ( paste type ) to external pipe threads.
Pipe Threads - End of threaded pipe is flush with the end of the number 1 die.
Make the gas connection to the inlet of the pressure regulator with 1/2 ” male pipe threads.
Tapered Pipe Threads - End of pipe is flush with the end of the number 1 die.
Use a pipe-joint compound that is insoluble in Liquefied petroleum ( Lp ) gas on all pipe threads.
The manifolds 74, 76 have screwed pipe threads for connection to threaded pipework of adjacent fluid systems.
Apply about 6 of Teflon tape ( B ) in clockwise direction to pipe threads of each adapter.
To prevent gas leaks, put pipe joint compound on, all male - external - pipe threads.
Preferably ports 66 and 72 are provided with internal pipe threads or the like.
Apply about 12 ″ of Teflon tape, in a clockwise direction, to the pipe threads of each fitting.
You'll also be interested in:
Examples of using Pipe
Show more
Pressure transmission pipe in the combustion chamber
Pipe is the heaviest wave in the world
Two pieces of pipe and a bicycle chain
Examples of using Threads
Show more
Threads have been caught in the hook area
Remove the threads and hairs with
Threads must neither be oiled nor greased
