Examples of 'plug cover' in a sentence
Meaning of "plug cover"
plug cover - a protective or decorative cover designed to be easily inserted into an opening or socket, used to cover wires, outlets, or connectors for safety or aesthetic purposes
How to use "plug cover" in a sentence
Basic
Advanced
plug cover
Fit the spark plug cover on the engine.
The peripheral ring is adapted to receive a plug cover.
Remove the plug cover from the back of.
Replace the drain plug and reattach the drain plug cover.
Remove the spark plug cover on the engine.
By precaution, disconnect the spark plug cover.
Position the spark plug cover onto the housing by.
Refit the spark plug, the plug cap and the plug cover.
Put the sparking plug cover back in its place.
Using a Phillips screwdriver, reinstall the wiring plug cover.
Remove spark plug cover and investigate the cause.
Stop the engine and remove the spark plug cover in these cases.
Replace the plug cover into its place and continue operating the appliance.
Pull off the USB plug cover.
Check to see if the plug cover on the shielded cable is loose.
See also
Using a Phillips screwdriver, reinstall the wiring plug cover upper drawer.
Push the spark plug cover back on again and lock.
Opening / closing the plug cover.
Disconnect the spark plug cover to prevent accidental starting of the.
Tully 3-point pin plastic plug cover UK.
Remove and retain the plug cover on the control unit to reveal the switch unit.
Tully 2-point pin plastic plug cover EU.
Tighten the threaded plug cover so that the cord can not be accidentally pulled out.
New products out! Mitsubishi Lancer evolution spark plug cover for E4-E9.
Remove the spark plug cover from the housing.
Keep the USB plug cover out of reach of children to prevent swallowing.
Using a Phillips screwdriver, remove the wiring plug cover for the upper drawer as shown.
Remove the spark plug cover and use a spark plug wrench to remove the spark plug.
Before replacing the plug cover make sure that.
Lift the plug cover and plug in the Power Tool behind the connector.
Store the removed USB plug cover in a safe place.
F Turn the plug cover on the drive unit to remove it.
Be sure to replace the wiring plug cover when installation is complete.
Lift the plug cover and plug in the Power Tool.
To open the plug cover, pull up on the seam of the plug cover projection.
Remove the spark plug cover on the top right side of the generator, just belowthe handleFigure12.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Plug
Show more
Plug the machine into a suitable outlet
Put the small plug in the appliance
Plug the charger into proper outlet
