Examples of 'polymerization temperature' in a sentence
Meaning of "polymerization temperature"
Polymerization temperature refers to the specific temperature range at which the process of polymerization occurs for a given substance. Polymerization is a chemical reaction in which small molecules, called monomers, combine to form a larger structure known as a polymer. The temperature at which this reaction takes place can significantly influence the properties and characteristics of the resulting polymer
How to use "polymerization temperature" in a sentence
Basic
Advanced
polymerization temperature
This temperature indicates the polymerization temperature.
The polymerization temperature is also conventional.
The reactor was heated to the polymerization temperature.
The polymerization temperature is not critical.
There is no specific limit to the polymerization temperature.
Maximum polymerization temperature of modified cements.
It is also remarkable when the polymerization temperature is lower.
Polymerization temperature may vary depending on catalyst choice.
Therefore it is desirable to apply a polymerization temperature as high as possible.
The polymerization temperature was controlled vÃa a recirculating water bath.
The autoclave is heated to polymerization temperature.
The polymerization temperature is an essential parameter to this invention.
The temperature was adjusted to the desired polymerization temperature.
The polymerization temperature may be varied.
It may be a room temperature or may be raised to polymerization temperature.
See also
Polymerization temperature and polymerization pressure are of minor importance.
The mixture is then heated to the polymerization temperature.
The polymerization temperature may vary within broad limits.
The temperature was maintained at the polymerization temperature except as shown.
The polymerization temperature can be changed during the reaction.
The selection is made depending upon the polymerization temperature.
The stated polymerization temperature was maintained by a circulating water bath.
One method involves the selection of the polymerization temperature.
The polymerization temperature differs depending upon compounds used.
The mixture is usually kept at polymerization temperature for another hour.
A high polymerization temperature results in a low molecular weight of polyethylene.
The mixture is brought with stirring to the desired polymerization temperature.
Heating the adhesive to a polymerization temperature while maintaining the pressure.
Polymerization temperature and polymerization pressure are also not particularly limited.
The polymerization time varies by various factors as the polymerization temperature does.
The polymerization temperature will depend on the kind of the initiator.
This can be done by heating the batch to the desired polymerization temperature.
The polymerization temperature depends on the initiators within certain limits.
This sensitivity of unsaturation to increases in epoxide polymerization temperature is preferably minimized or eliminated.
The polymerization temperature in such the reaction is not particularly limited.
Conveniently the charge is brought to polymerization temperature during this agitation period.
The polymerization temperature in the first step is not specifically defined.
The solution is purged with nitrogen and heated to the polymerization temperature.
The polymerization temperature is selected as a function of the decomposition temperature of the initiator.
The mixture is stirred at the polymerization temperature for a specified period of time.
The polymerization temperature varies depending upon the polymerization initiator to be used.
They are normally liquids or have melting points below the polymerization temperature.
The proper polymerization temperature varies depending on the polymerization initiator used.
This temperature is generally less than the polymerization temperature of the intumescent material.
The polymerization temperature and the polymerization time may also be suitably adjusted.
Heating the reaction medium to the polymerization temperature in the presence of a radical initiator.
The polymerization temperature is selected based on the molecular weight desired in the product.
Heating means and means for controlling the polymerization temperature may be provided.
The polymerization temperature is selected by the skilled person according to the desired outcome.
Examples of suitable inert solvents are aromatic hydrocarbons which are liquid at the polymerization temperature.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Polymerization
Show more
It can react in cationic polymerization to polycyclohexene oxide
The polymerization is unusual for a nylon polymer
Photoinitiators for the polymerization of artificial resins
