Examples of 'pump switch' in a sentence
Meaning of "pump switch"
pump switch: The phrase 'pump switch' is used to describe a device or mechanism that controls the operation of a pump. It can refer to a physical switch that turns a pump on or off, or to an automated system that regulates the pumping process
How to use "pump switch" in a sentence
Basic
Advanced
pump switch
Check that the pump switch is turned on.
Disconnect power to pump assembly main switch or pump switch.
Turn pump switch on and operate spray gun for approximately one minute.
Switch on power to pump assembly main switch or pump switch.
And the pump switch in the ON position Fig.
Switch off power to water pump main or pump switch.
Slide the circulation pump switch to position I.
Switch on power for water pump main switch or pump switch.
There's gotta be a pump switch in here somewhere.
Interrupt power for water pump main switch or pump switch.
The low-load pump switch control mode may correspond to the method disclosed above.
Disconnect power for water pump main switch or pump switch.
Turn the key and the solution pump switch to the ON position Figure 7.
The amount of detergent required for cleaning can be regulated by the pump switch.
Replace pump switch every 2 years.
See also
Switch off the power for the water pump main switch or pump switch.
The cover can be closed and the pump switch 69 is automatically switched on.
Connect pumpout hose to pump outlet and turn pump switch ON.
Move the pump switch to the " ON " position to start the pumping unit.
Alternatively power can be obtained through the filter pump switch to the coil of a solenoid.
Move the pump switch to the " OFF " position to stop the pumping unit.
Debris can also be a factor ; it can interfere with the action of the pump switch.
If the pump switch is in the “ Off ” position, the heat pump is not operational.
When cleaning with the Steam Mop is completed, press the steam pump switch.
Activate pump switch and press vacuum / blower switch towards vacuum symbol Figure 35.
This actuating pin actuates the pump switch 70.
Press the steam pump switch to the ON ( I ) position.
Over here! My first fire, I flicked the wrong pump switch.
Therefore, in step S1 a low-load pump switch control mode is started.
Press the pump switch ( 2 ) until water continually flows from the water / steam distribution nozzle 6.
Anywhere but there! There's gotta be a pump switch in here somewhere.
Turn the pump switch to the ' Off ' position.
Open the water / steam faucet by rotating the knob ( 5 ) counter-clockwise and press the pump switch 2.
Be switched off by placing the pump switch in the OFF position Fig . 21.
Place the pump switch in the OFF position Fig . 21.
To stop the filtering operation, place the pump switch in the OFF position Fig . 21.
Press the steam pump switch to the OFF ( O ) position.
Manually place the regeneration pump switch SW1 in its " AUTO " position.
Manually place the regen chemical pump switch SW4 in its " AUTO " position.
To stop the equipment, place the pump switch in the OFF position Fig . 21.
Manually place the paint pump switch SW2 in its " AUTO " position.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Pump
Show more
Clean the pump at least twice a year
Check that the drain pump is level
However the pump can be activated in commissioning
