Examples of 'push switch' in a sentence
Meaning of "push switch"
push switch ~ a type of switch that is activated or operated by pushing it, typically used to control electrical circuits or devices
How to use "push switch" in a sentence
Basic
Advanced
push switch
Please do not push the push switch.
Push switch lockout forward before squeezing trigger.
Switch off the microphone push switch downwards.
Push switch firmly either up or down.
The detection sensor may comprise a push switch.
Push switch and turn sanding belt te check position.
Check the sensor mode by pushing the push switch.
Push switch firmly either to the right or to the left.
It is preferred that said manually operable device is operated by manually operating a push switch.
Push switch to off and replace fuse or reset circuit breaker.
Master current adjustment knob with pull and push switch mechanism for parallel.
The push switch in the right transmitter changes the system to the following modes.
Enable scale calibration by toggling the Calibration push switch off.
Please do not push the push switch in the right transmitter while calibrating the sensor.
The TUNE control is a push switch.
See also
Press the push switch with a glass or other container and cubed ice will be dispensed.
Ensure Dust Control OFF switch is not selected push switch to turn ON.
Push switch to off and push reset button on GFCI.
Ensure Side Broom OFF switch is not selected push switch to turn ON.
Push switch to OFF to stop the blender and turn blender off.
After confirming the blink, release the push switch.
Once finished push switch on O position and unplug.
Push the key firmly into the slot, then push switch to.
Push switch into OFF position.
The direction of rotation can be selected by operating the forward / reverse push switch.
Push switch to left clockwise rotation II.
The rotary switch 3 in the above technical solution can be replaced by a push switch.
Push switch on position I to start suction.
To turn cleaner OFF, push switch toward back of cleaner.
Push switch firmly to the right or to the . left.
To turn brushroll OFF, push switch again.
To use PULSE, push switch down for desired length of time.
To turn cleaner OFF, push switch down.
Push switch lever down to disengage clutch and engage 2WD mode.
Such solenoid valve is controlled by a stable push switch 14 preferably placed in the driver 's cabin.
Push switch for more than 3 seconds to enter Service Mode.
To turn vacuum OFF, push switch again.
Push switch to O / OFF to stop the blender and turn blender off.
ON-OFF SWITCH To turn power on, push switch to the ON position.
Push switch to right counter-clockwise rotation I.
Set desired speed using speed selector ( 2 ) and push switch.
Push switch 1 to actuate the motor.
The cross key 72a is a cross-shaped four-direction push switch.
Turn the push switch until a “ click ” can be heard.
Push switch to the ON ( I ) position to turn compressor on.
To turn cleaner ON, push switch ( A ) toward front of cleaner.
Push switch to the OFF ( O ) position to turn compressor off.
Configurable push switch button " IP / Reset.
Push switch button and hold until all air is removed from bag . ( Fig . 2 ) NOTE.
To turn saw off, push switch lever down to its original position Fig . 38.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Push
Show more
Do not let her push your buttons
Then push that and delegate that
I tried my best to push the bill through
