Examples of 'replace cover' in a sentence
Meaning of "replace cover"
This phrase refers to the action of substituting or exchanging a protective covering or casing for an object. It typically involves removing the existing cover and installing or placing a new one in its position
How to use "replace cover" in a sentence
Basic
Advanced
replace cover
Replace cover and reattach latches to cover.
Damaged cover seal replace cover seal.
Replace cover plate and storage drawer.
Fix to wall using screws supplied and replace cover.
Replace cover plate and tighten screws.
Close valve completely and replace cover after towing.
Replace cover and snap into place.
Push wires into junction box and replace cover.
Always replace cover immediately after installing brushes.
Make sure the polarity is correct when inserting battery and replace cover when done.
Replace cover and tighten screws or knob securely.
Install foam element, then replace cover.
Replace cover and store on an interior refrigerator shelf.
Remove lint filter cover, clean lint filter and replace cover.
Replace cover and fasten with two bolts.
See also
Remove clear cover over indicator and clean screen ; replace cover.
Replace cover and screw to secure.
NOTE, After cleaning the air cleaner element, replace cover and push fully home.
Replace cover on lint screen body.
Properly insert batteries, noting correct direction, replace cover and close the Security Box lid.
Always replace cover immediately after lubricating machine.
Install cartridge, then replace cover.
Replace cover and tighten by hand.
Open battery compartment, pull out insulation strip, replace cover.
Replace cover over bulb and turn clockwise to fasten.
Tighten the cable gland, replace cover on body and screw in 6 cover 's screws.
Replace cover plate on chip case and fasten with screws.
Replace cover again and the air cleaner will run at selected speed.
Replace cover to the battery compartment of the main unit and secure screw.
Always replace cover screw after adjustment and tighten firmly to ensure proper operation.
Replace cover with the required Component Adapter.
Replace cover and tighten 4 screws firmly.
Replace cover screws, light bulb and light cover.
Replace cover and screws . Do not pinch wiring under cover.
Replace cover by inserting bottom tabs ( 9 ) and snapping into place.
Replace cover ( Q ) on drilling head and reassemble to dust extraction system D.
Replace cover and filler cap and run on LOW ( 1 ) speed for 2 minutes.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Replace
Show more
Replace the leads in the rear upright
Do not attempt to replace the plug yourself
Replace the lid before recommencing blending
