Examples of 'sanding belt' in a sentence
Meaning of "sanding belt"
A sanding belt is a type of abrasive tool that is used in woodworking and metalworking to shape and smooth surfaces. It consists of a loop of sandpaper or abrasive material that is wrapped around two rollers and attached to a mechanical sander
How to use "sanding belt" in a sentence
Basic
Advanced
sanding belt
Remove the sanding belt as described in ASSEMBLy.
Never touch the running sanding belt.
Only use sanding belt in good condition.
Check the tracking of the sanding belt.
Mount the sanding belt as described above.
Tightening and adjusting the sanding belt.
Remove the sanding belt in reverse order.
Increase the pressure on the sanding belt.
Install a sanding belt as described in ASSEMBLy.
Surfacing or edge sanding with the sanding belt.
The pressure on the sanding belt is insufficient.
Sanding belt runs off pulleys.
Replace a defective sanding belt immediately.
Sanding belt does not come up to speed.
Ensure that the sanding belt is free of bends.
See also
Sanding belt grain should be coarser than sandpaper.
Pull the sanding belt off.
Sanding belt comes off the drive pulleys.
Adjusting the sanding belt tracking.
The sanding belt will stretch during use.
Do no use the same sanding belt for sanding.
The sanding belt is ideal for planing wood.
Keep hands away from sanding belt or disc.
Lock the sanding belt by retightening the screws.
Use the correct sanding belt.
Align the sanding belt to its correct position.
Follow these steps to adjust sanding belt tracking.
Place new sanding belt over sanding drums.
Regularly check the condition of the sanding belt.
Be sure the sanding belt is centered on both drums.
The worktable is used with the sanding belt.
Position the sanding belt around the drive.
Sanding belt runs out of sanding belt bed.
Check that the sanding belt is turning correctly.
Avoid contact with the moving sanding belt.
Pallet with sanding belt for broadband powder.
Replace it with a new sanding belt.
Pull the sanding belt from the two rollers.
Top and bottom sanding belt.
Use sanding belt of same grain size until uniform.
Push switch and turn sanding belt te check position.
Keep hands and fingers clear of moving sanding belt.
If the sanding belt slips or does not track while sand.
Use only correct size sanding belt and disc.
The sanding belt is now loose and can be taken off.
Place the sander with sanding belt up as shown in fIG.
How to remove and replace the drum sanding belt.
Make sure the sanding belt is not twisted or loose.
This is the correct tension for the sanding belt.
Place a new sanding belt making sure that the.
You'll also be interested in:
Examples of using Belt
Show more
I am wearing a belt of staples that go into my skin
I think there are actually whales on his belt
He had a belt tied around his neck
Examples of using Sanding
Show more
Sanding sheets are available in a variety of different grades
Recoatable without sanding of the previous layer
Sanding discs are available in a variety of different grades
