Examples of 'sanding disc' in a sentence
Meaning of "sanding disc"
sanding disc: an abrasive tool used for smoothing surfaces, typically attached to a rotary sander or power drill
How to use "sanding disc" in a sentence
Basic
Advanced
sanding disc
Sanding disc or belt glazed with sap.
Replacing the sanding disc or floor brush.
Sanding disc or belt covered with grease.
Do not touch the moving sanding disc.
Check sanding disc regularly for faults.
Do not use excessively oversized sanding disc.
Center the sanding disc on top of the.
To install backing pad and sanding disc.
Slide sanding disc under clamp rail.
To remove backing pad and sanding disc.
Place the sanding disc on the rubber.
Polishing with a sander using fi ne sanding disc.
The moving sanding disc can cause injury.
Sanding tool for nTx sanding disc.
Check that sanding disc is mounted under the.
See also
Selecting the right grade of sanding disc.
Replace the sanding disc when it is worn or damaged.
Peel the backing from a new sanding disc.
Inspect sanding disc before installing.
Fitting the backing pad and sanding disc.
Align holes in sanding disc with holes in back.
The worktable is used with the sanding disc.
Secure the sanding disc using a clamping element.
Remove the backing from the sanding disc.
The sanding disc works in small circular movements.
Replace a defective sanding disc immediately.
Clamp sanding disc on other side with clamping.
Replace any torn or worn sanding disc immediately.
Put the sanding disc in position on the sanding pad.
Attach backing pad and sanding disc as shown.
Place the sanding disc on the rubber backing pad.
Turn dial to a lower setting to decrease sanding disc speed.
Center the sanding disc on top of the backing pad.
Preliminary polishing with sander using a finegrain sanding disc.
Align perimeter of sanding disc with plate and press.
Never put on the whole surface of the sanding disc.
Press the sanding disc against the backing pad as.
Adjust worktable square to the sanding disc and retight.
Remove the sanding disc in the reverse order to attachment.
To touch the wool bonnet or sanding disc during operation.
Pull sanding disc tightly over the sanding plate.
End sanding and mitre sanding with sanding disc.
Lower the sanding disc to the surface and begin sanding.
Working with backing pad and sanding disc or brush.
Rotate the sanding disc by hand to ensure that no contact is made.
Always be aware of the rotation direction of the sanding disc.
Keep away from a revolving sanding disc and wool bonnet.
Allow sanding disc to come to full speed before beginning to sand.
Align the holes in the sanding disc with the holes in.
To move the pattern to the outer edge of the sanding disc.
You'll also be interested in:
Examples of using Disc
Show more
Failed to play the disc is incorrectly inserted
The disc is rotating but no picture is produced
A poorly manufactured disc may not be playable
Examples of using Sanding
Show more
Sanding sheets are available in a variety of different grades
Recoatable without sanding of the previous layer
Sanding discs are available in a variety of different grades
