Examples of 'sanding pad' in a sentence
Meaning of "sanding pad"
sanding pad - a tool used for sanding surfaces, typically made of abrasive material attached to a pad or backing
How to use "sanding pad" in a sentence
Basic
Advanced
sanding pad
Gradually lower sanding pad to the floor.
The sanding pad rotates clockwise during the.
Utilize an even pressure across the sanding pad.
Fitting the sanding pad and sanding sheets.
To attach paper to the sanding pad.
Keep sanding pad fl at on the workpiece.
The motor is located under the sanding pad.
Remove the sanding pad for closer inspection.
Avoid direct contact with the sanding pad.
Replace sanding pad and sanding pad brake.
Put the sanding disc in position on the sanding pad.
You can change the sanding pad in this position.
Your sander is also includes a round random orbit sanding pad.
Align and position sanding pad over backing pad.
The film was wrapped over the edges of the sanding pad.
See also
Use the grey sanding pad to degrease the area.
Remove air hose to lubricate or add sanding pad to the tool.
Select the sanding pad or profile holder that best fits your application.
The guarantee does not cover sanding pad wear and tear.
With the sanding pad stationary because the switch is locked during operation.
Sanding sheets come loose from sanding pad during use.
The resulting sanding pad could be repaired easily by deforming along a concave surface.
Turn the sander over so that the sanding pad is facing upward.
Plastics must be cleaned and slightly sanded with an abrasive sponge or a sanding pad.
Always remove scrubbing or sanding pad from sander before cleaning.
The holes on the sand paper should match those on the sanding pad.
Put the felt ring and the sanding pad on the dust attach.
Align the sanding sheet and press it manually against the sanding pad.
Do not operate the tool if the sanding pad is not tightened to the sander.
The sanding pad and the sanding paper must be used for sanding applications.
Avoid direct contact with the moving sanding pad in order to prevent.
Push in the spindle lock button and securely hand tighten the sanding pad.
Extra paper extending beyound the sanding pad can also cause serious lacerations.
Ensure sandpaper is the correct size and type for the sanding pad used.
Extra paper extending beyond the sanding pad can also cause serious lacerations.
Set any exposed nails with a hammer and punch to avoid encounter with sanding pad.
Tilt the machine back so that the sanding pad does not contact the floor.
The deformed sanding pad is cooled below the heat distortion temperature to fix the shape.
Always ensure the extraction holes on the sanding pad are kept clean.
Align paper over sanding pad then press firmly over entire surface of sanding pad.
Hook and loop fastenings worn on pad Replace sanding pad.
Stretch paper over sanding pad and insert under the opposite clamp in the same way.
DO NOT allow sanding sheets to wear away on the sanding pad.
Sanding pad Gives the dimensions of the sanding pad.
Hook and loop surface of sanding pad worn out Replace sanding pad.
The Sanding Pad and sanding sheets use a hook and loop system for attachment.
Sanding sheets come loose from sanding pad in use Speed set too high Reduce speed.
Disconnect the sander from the air supply before attaching the Sanding Pad.
Sanding sheets come loose from sanding pad during use Speed set too high Reduce speed.
Place desired sandpaper onto the sanding pad D.
You'll also be interested in:
Examples of using Pad
Show more
The pad has to be replaced in that case
Brake lining or brake pad method of attachment
Launch pad runs completely on internal power
Examples of using Sanding
Show more
Sanding sheets are available in a variety of different grades
Recoatable without sanding of the previous layer
Sanding discs are available in a variety of different grades
