Examples of 'sanding sheet' in a sentence
Meaning of "sanding sheet"
A sanding sheet is a piece of abrasive material, usually made of sandpaper, used for smoothing or shaping surfaces by removing small amounts of material. It is commonly used in woodworking, metalworking, and other crafts to achieve desired texture or finish on different materials
Show more definitions
- a sheet of sanding paper or sandpaper
How to use "sanding sheet" in a sentence
Basic
Advanced
sanding sheet
Attach a sanding sheet with coarse grain.
Installing support plate and sanding sheet.
Attach a sanding sheet with fine grain.
Selecting the right grade of sanding sheet.
Position the sanding sheet and press on.
Regularly check the condition of the sanding sheet.
Pull off the sanding sheet or polishing tool.
Grit detailed finger sanding sheet.
Place the sanding sheet onto the sanding base.
And pull out the sanding sheet.
Pull off the sanding sheet or the polishing accessory.
Avoid contact with the moving sanding sheet.
Place the sanding sheet on the rubber backing pad.
Clamp the other end of the sanding sheet.
Simply press the sanding sheet on to the pad to attach it.
See also
This protects the appliance and the sanding sheet.
Pay attention that the sanding sheet is clamped centrally.
A sanding sheet that has been used for metal should.
Simply pull the sanding sheet off the backing.
Operate the device only with an attached sanding sheet.
Always remove sanding sheet from sander before cleaning.
Never operate the sander without a recommended sanding sheet properly.
Fit the appropriate sanding sheet onto the finger attachment.
Clean the sanding disc before you attach a sanding sheet.
Tighten sanding sheet with support plate manually in a clockwise direction.
Never use the tool without a sanding sheet or accessory in place.
Clean the sanding plate before you attach a sanding sheet.
Press the sanding sheet firmly against the sanding plate.
Firmly press the power tool with the sanding sheet against.
Align the sanding sheet with the contour sanding piece.
Never use the sanding head without a sanding sheet or accessory in place.
Clean the sanding sheet with a vacuum cleaner or knock it out.
Never use the sanding base without a sanding sheet or accessory in place.
Screw on sanding sheet with adjusting nut supplied with support plate.
To increased wear of the machine and premature wear of the sanding sheet.
Select the required sanding sheet for your intended task.
Regularly brush down or vacuum the surface being sanded to ensure the sanding sheet is.
Grit large detail sanding sheet with two replacement tips.
The hole pattern in the sanding plate and sanding sheet must match.
Replacing the sanding sheet regularly will maintain optimum working efficiency.
The removal capacity during sanding is mainly determined by the selection of the sanding sheet.
Align the sanding sheet and press it onto the sanding plate.
Reduce the orbital stroke rate and allow the sanding sheet to cool down regularly.
Grasp the sanding sheet at one of the tips and pull off.
Grind rough corners and edges with the top or side edge of the sanding sheet.
Clean the sanding sheet every once in a while using a vacuum cleaner.
Always remove the scrubbing pad or sanding sheet from sander before cleaning.
Clean the sanding sheet from time to time with a vacuum cleaner.
J Use the appliance only with a sanding sheet in place.
Sure that the sanding sheet follows the shape of the profile.
You'll also be interested in:
Examples of using Sanding
Show more
Sanding sheets are available in a variety of different grades
Recoatable without sanding of the previous layer
Sanding discs are available in a variety of different grades
Examples of using Sheet
Show more
Polycarbonate sheet to protect against direct contacts
We got all type of potential on this sheet
Model information sheet for local communities
