Examples of 'screws to secure' in a sentence
Meaning of "screws to secure"
This phrase indicates the use of screws to fasten or attach something securely. It suggests that screws are being used as a means of reinforcement or stability to keep an object or structure in place
How to use "screws to secure" in a sentence
Basic
Advanced
screws to secure
Tighten the screws to secure the camera.
Screws to secure the upper handle to the lower handle.
Tighten the screws to secure the canopy.
Screws to secure the fuel cartridge holder use screws with a.
Tighten strain relief screws to secure cord.
Tighten screws to secure hood to the wall.
Close the cover and apply screws to secure it.
Tighten screws to secure fi xture to ceiling.
Replace the air filter cover and tighten screws to secure.
Tighten the screws to secure the connection.
Install the sprocket guard and tighten the screws to secure it.
Replace all five screws to secure nozzle guard.
Replace the dust hood and reinstall dust hood screws to secure.
Tighten the thumb screws to secure the connections.
Slide the screws down to the smaller holes and tighten the screws to secure.
See also
Tighten the thumb screws to secure the tube.
Wood screws to secure the wood support to the wall.
Fit the retaining screws to secure the servos.
Place nozzle assembly and joint in its place and then tighten screws to secure them.
Use the two screws to secure it.
Fit the handles on the opposite side, using the fi xing screws to secure them.
Retighten the screws to secure it in the desired position.
Afterwards fix the red ribbon with the screws to secure the tension.
Tighten the screws to secure the brackets in place.
Hold door and hinges in desired position and tighten screws to secure the hinges.
Replace the screws to secure it in place.
On the opposite side, using the fi xing screws to secure it.
Tighten all screws to secure panels.
Place a speaker onto the TV, and insert the four screws to secure it.
Tighten the screws to secure the extension modules.
To enhance stability, use all the four screws to secure the bracket.
Tighten screws to secure the side bracket to the oven.
Lastly, tighten the four screws to secure the camera.
Locking screws to secure the power mixer in the compartment.
Use the supplied round head screws to secure the NSR to the rack.
Use wood screws to secure housing to cleats through four holes in housing 's.
Tighten the counterweight screws to secure the counterweights.
And use screws to secure everything. Then I will switch to a Phillips screwdriver bit.
Always tighten the two screws to secure the adjusting.
Use 4 screws to secure the unit into the wall Figure 5.
Use the supplied round head screws to secure the unit to the rack.
Line up the holes on each end and use four 1/4 ” pointed end screws to secure.
Tighten the set screws to secure the wires.
Reinstall the bottom cover removed in Section 1 using the 4 screws to secure it in place.
Then tighten the screws to secure the adjusting ring.
Close the top cover, and re-install the two screws to secure it.
Slightly tighten these screws to secure the swiveling camera.
Remove 8 pre-assembled screws from the bottom panel and use those screws to secure the 2 casters.
Tighten the screws to secure the crown molding stoppers.
After leveling the griddle, tighten the clamping screws to secure griddle in place.
You'll also be interested in:
Examples of using Secure
Show more
Have your men secure the floor
Secure the coaxial cable to the ceiling
Get him to a secure room under observation
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
