Examples of 'screws used' in a sentence
Meaning of "screws used"
Screws used: indicates the act of employing screws as fasteners or connectors in a construction or assembly process
How to use "screws used" in a sentence
Basic
Advanced
screws used
The wood screws used were hand forged.
On the type and length screws used.
The screws used will advantageously be standardized screws.
There are two types of screws used.
Screws used in our equipment design are RoHS guaranteed.
These are the actual surgical screws used in reconstructing her ankle.
All screws used for mounting the fixture or parts of it need to.
Machine screws are a subcategory of screws used to attach pieces of machinery together.
Screws used must be tightened and may not show rust marks.
Imagine going to different factories and examining the pitches and lengths of the screws used.
Unfasten the six screws used to secure the stand in place.
The data correspond to 6 different series of screws used on rally cars.
Loosen screws used to hold the middle hinge and remove middle hinge.
Remove the two safety screws used during transport D.
The screws used are single extrusion screws having pitch profiles adapted to polyamides.
See also
For wooden beam ceilings, drill according to the wood screws used.
Make sure that the screws used are long enough to ensure stable mounting.
Installation with fixings During all installation work, observe the specified torques for the screws used.
The number of screws used for fixation varied according to the safety margin.
Caused a significant amount of bleeding. One of the screws used to reconstruct Ashley's spine.
The adjustable screws used herein are preferably machined from stainless steel stock.
Special head screw, special screw, stainless steel screws used for Intelligent Projector Parts.
Holes for screws used for installation of WLAN adapter on the wall.
Door Mounting Screws 4 long silver screws used.
Cause Solution Screws used to install the sensor are loose.
Holes may need to be pre-drilled, depending on the type of screws used.
Screws used to attach duct to Duct Connector may prevent damper from opening.
Remove the 2 vertical hexagonal screws used to attach the right rear side panel.
Screws used to attach the parts are already pre-placed on the parts or grill body.
Now remove the 8 hexagonal screws used to attach the two side stone holder.
The screws used in Example 1 and Comparative Example 2 had the following dimensions,.
Figure 2 - Examples of plates pins and screws used to join fractures while they heal.
Pedicle screws used for spinal surgery generally include a shank 3 and a receiving member 5.
Open the 2 hex screws and the 2 Allen screws used to attach the two covers.
The number of screws used in the screw joint may also vary, and so on.
Figs . 4, 5 and 6 show configurations ofplasticization kneading portions for the screws used in the embodiment.
Remove the 4 hex screws used to attach the convection fins.
The screws used for each of these sides 22, 32 are conventional in aeronautics.
The number of mounting screws used may depend on the overall configuration of blade 134.
The straining screws used to fine-tune the camber are located in the upper control arms.
The profiles of the screws used are mainly of KB type ( Kneading Block ).
X 9.5 mm screws used for supporting the lower chimney located inside canopy behind filters.
Fully tighten all screws used in the preceding procedures to 23 ft-lbs of torque, in.
Remove the three screws used to attach the camera in step 5 of “ Installation . ” 2.
You'll also be interested in:
Examples of using Used
Show more
Not to be used if you have a heart condition
The correct presser foot is not being used
I used to play a little ball myself atWhittier
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
