Examples of 'securing screw' in a sentence
Meaning of "securing screw"
securing screw ~ means to attach or fasten a screw in place to ensure that it remains in position and does not come loose
How to use "securing screw" in a sentence
Basic
Advanced
securing screw
Unscrew the light cover securing screw.
Tighten the securing screw at the top of the grille.
Unscrew the lamp cover securing screw.
Unscrew cover securing screw and remove device cover.
Do not touch or tamper two securing screw.
Replace the securing screw to the front of the dilution plate.
Lock the shaft nut with the securing screw.
Unscrew grille securing screw located at the top of the grille.
The battery is attached to the housing with a securing screw.
The securing screw on the protective hood must always be firmly tightened.
Cleaning slider and remove the slider securing screw.
Remove the securing screw from the front of the dilution plate.
The recesses are open to the circumference of the securing screw.
Insert the securing screw that holds the optical drive in place.
There is a supplementary securing screw.
See also
The securing screw comprises recesses for transferring torque with a tool.
Replace the light bulb cover and the securing screw.
Remove the securing screw from the front of the vent mounting plate.
Set the required position and tighten the securing screw again.
Then make sure securing screw aligns with notch on motor shaft and tighten.
Now close the battery compartment lid and replace the securing screw.
Release the securing screw on the air filter cover and remove the cover.
Furthermore it does not indicate how to connect the temporary dental bridge by a securing screw.
And screwing the securing screw fully tight to achieve final securing of the two slats.
Such forces can also cause bending and even shearing of the securing screw.
Unscrew the left threaded securing screw 1 by a screwdriver.
The transition part is coupled to the anchoring part by a guide pin and securing screw.
A securing screw 8 serves to block this pivotal movement.
Align the protective hood if necessary and tighten the securing screw firmly with a screwdriver.
Undo the securing screw shaft nut 6.
Fit the chosen objective lens into the objective seat and tighten the securing screw.
Please observe that the securing screw has a left-hand thread.
By means a screwdriver unwind the left-treaded securing screw.
Please note that the securing screw has a left-hand thread.
By means of a screwdriver unwind the left-threaded securing screw.
Replace blade, tighten securing screw and securely fasten the front grill.
Using a screw driver unwind the left-threaded securing screw.
G2Unscrew the grille securing screw and remove grille.
Thus, the spring can be secured independently of any securing screw.
Fit the cover again and screw in the securing screw clockwise until hand-tight.
The chuck is secured against being loosened from the spindle with securing screw 14.
Unscrew the left threaded securing screw using S5 hex bit.
The securing screw 50 is intended to lock the whole in the desired position.
To hold the rod in the slot, a securing screw is provided.
Screw securing screw 17 in anticlockwise direction into the open keyless / key type drill chuck.
Always keep the spindle threads, chuck threads, and securing screw free of debris.
Loosen securing screw ( C ) on side of protrusion first.
To change an objective lens, loosen the lens securing screw and remove the lens.
Screw the threejaw chuck onto adapter 3 and fix it by securing screw 1.
The keyless chuck 1 is secured with a securing screw 13 against unintentional loosening from the drill spindle.
You'll also be interested in:
Examples of using Securing
Show more
Securing the cooperation of witnesses and accomplices
Loosen the screw securing the lever
Securing the necessary budget from government
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
