Examples of 'set screw' in a sentence
Meaning of "set screw"
A set screw is a type of fastening screw that is generally used to secure an object within or against another object
Show more definitions
- A screw with threads along the entire length and no head. Typically, set screws have a hex or slot drive recessed in the threaded length; a grub screw or worm screw.
- Any screw used to hold or adjust a setting: frequently a set screw (sense 1), but may also be any other machine screw or thumb screw used for the purpose of setting.
- A screw with a head, usually hexagonal, like a bolt but without a shank to allow it to screw into material rather than take a nut; a tap bolt.
How to use "set screw" in a sentence
Basic
Advanced
set screw
Place set screw on flat end of shaft.
Carefully loosen the knob set screw.
Set screw under the tail cover.
Loosen the set screw on the focuser.
Set screw driving by turning the sleeve.
Loosen the set screw and adjust.
A set screw is threaded into each orifice.
Lower housing support set screw loose.
Loosen set screw on air adjustment rods.
Fan motor assembly coupling set screw.
Tighten set screw to hold ball in place.
Do not completely remove set screw from collar.
Loosen set screw that holds ball.
Securely tighten the set screw r.
Tighten set screw after adjustment is made.
See also
Loose fan pulley set screw.
Headless set screw with flat point.
The fan is located with the set screw in.
Headless set screw with dog point.
Retighten the engine drive pulley set screw.
Headless set screw with cone point.
Tighten the motor drive pulley set screw.
Motor coupler set screw is loose.
Set screw for guide rai.
Securely tighten set screw to torque.
Loosen set screw using hex wrench provided.
Avoid overtorquing the internal master set screw.
Tighten the set screw firmly without forcing it.
Please unscrew the lamp housing set screw.
Retighten set screw once adjustments have been made.
Torque the motor drive pulley set screw.
Insert set screw and begin to tighten by hand.
Rubber flywheel set screw loose.
Set screw with hexagonal socket.
Readjust and tighten motor pulley set screw.
Set screw on hanging ball is not tightened properly.
This replaced the earlier set screw method.
Loosen the set screw to make the adjustment.
Headless hexagon and fluted socket set screw.
Tighten the set screw e to prevent the synchronizer r.
Hexagonal socket headless set screw.
Set screw lugs enable cable repair by operator.
It is preferred that said closure member is a set screw.
Tighten the set screw on the brass cable connector.
The sample was clamped by a set screw on each side.
Tighten set screw to lock the guide roller shaft.
One of them is held by a set screw.
Failure to tighten set screw allows easy removal of spout.
Apply thread lock and tighten the set screw.
Remove the set screw on the underside of the tool.
You'll also be interested in:
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
