Examples of 'set screws' in a sentence
Meaning of "set screws"
Set screws are small threaded screws used to secure objects, typically in mechanical or construction applications
Show more definitions
- plural of set screw
How to use "set screws" in a sentence
Basic
Advanced
set screws
Set screws aside for later usage.
Secure with set screws and nut.
Two set screws are installed in the outer armpost.
Adjust the tilt with set screws.
Loosen the set screws located on the.
Set screws down by their related parts to avoid.
Do not tighten set screws until indicated.
Set screws aside and remove cover plate.
Tighten yoke set screws and nuts securely.
Replace and tighten set screws.
Slotted set screws with cone point.
Loosen the two set screws.
Tighten set screws with screwdriver.
Tighten fan pulley set screws.
Loosen set screws holding guide roller shafts.
See also
Loose fan pulley set screws.
Loosen the set screws on the seal collar.
Line up cutter flats with arbor set screws.
Tighten yoke set screws and nut securely.
Simple and quick adjustment with set screws.
Tighten the set screws completely.
The clearance is adjusted by means of the two set screws.
Locking set screws for focus and iris.
Do not tighten the set screws.
Specially for set screws and fastening screws.
Securely tighten the set screws t.
Tighten the set screws on the seal gland.
Then fill it with set screws.
The set screws are tightened using a torque wrench.
Certain embodiments do not incorporate set screws or bumpers.
Tighten the set screws to secure the wires.
Adjust the radius and tighten the set screws.
The set screws that hold it on were lose.
Firmly tighten the set screws u in the feed dog.
The set screws should be turned the same amount.
Always adjust both set screws to the same height.
Fasten the holding clips by tightening the set screws.
Tightening the set screws increases friction on the slide.
And get the rods and place set screws.
Drive two set screws in the sides of the handle.
Thread one of the pointed set screws into its hole.
T he set screws for belt cover instalation are in the accessories pocket.
All dimensions are stove dimensions without handle and set screws.
Fully tighten all set screws to secure handle in place.
Insert keys and fasten the sprockets with the set screws.
Tighten downrod set screws and then tighten nuts.
The roller is held into position by roll pins and set screws.
Loosen the two set screws in the downrod support.
Files with flat mounting surfaces must be secured with set screws.
Loosen the set screws and remove the tail cover.
You'll also be interested in:
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
