Examples of 'shear rate' in a sentence
Meaning of "shear rate"
shear rate: The rate at which adjacent layers of a fluid move with respect to each other, typically measured in per second. This phrase is commonly used in the field of fluid dynamics and rheology
How to use "shear rate" in a sentence
Basic
Advanced
shear rate
Determination of rheological parameters at low shear rate.
The shear rate is proportional to the injection speed.
The viscosity depends on the shear rate.
This shear rate is set by the pressure drop.
The output is viscosity as a function of shear rate.
Determining the shear rate for the profile.
Normal stress measurements are obtained at each shear rate.
Shear rate through the die openings affect porosity.
Plotted is viscosity versus shear rate.
Shear rate was increased steadily by increasing the screw rpm.
Protein concentration affects dependence of viscosity on shear rate.
There may be an optimum shear rate for mixing.
Vehicle choice affects dependence of viscosity on shear rate.
The shear rate decreases as the flow rate decreases.
Viscosity decayed exponentially with respect to shear rate.
See also
Both viscosity and shear rate were recorded for analysis.
The viscosities are then plotted as a function of shear rate.
The resulting shear rate and melt viscosity are plotted.
Viscoelasticity manifests itself in shear rate thinning behavior.
The low shear rate is required to minimize changes to the product.
It is called the shear rate.
A higher onset shear rate reflects an improvement in melt fracture response.
It preferably has interlocking teeth to increase the shear rate.
The corrected shear rate and shear viscosity were reported herein.
Cone and plate viscomneter operated at high shear rate.
Is the shear rate.
All steps are repeated for each apparent shear rate.
The range of shear rate applied is representative of standard transformation process.
Cone and plate viscometer operated at high shear rate.
High shear rate viscosity is a determining factor in which blade pressure to apply.
An increase in line speed is equivalent to an increase in the shear rate.
The critical shear rate of polypropylene may also be enhanced by adding polyethylene.
This phenomenon appears especially when a critical shear rate is exceeded.
Increasing shear rate can reduce viscosity of high concentration protein formulations.
The torque that was required to maintain a certain shear rate was measured.
Then the effect of mean shear rate was investigated in an anaerobic stirred tank reactor.
These fluids have a constant viscosity value at a given shear rate.
In order to achieve an acceptable shear rate a very high agitator power input is employed.
The torque that is required to maintain a certain shear rate is measured.
The shear was measured in shear rate mode with logarithmic sweep type steps.
Viscosity is then calculated as the ratio of shear stress to shear rate.
This means that with an increase in shear rate the viscosity tends to decrease.
Such behavior is characterized by a decrease in viscosity as the shear rate increases.
The viscosity decreases with increasing shear rate as well as with increasing temperature.
One strategy to accomplish this is to apply a second strong shear rate.
Data are plotted as viscosity versus shear rate and viscosity versus shear stress.
The nozzle length and angle affect the shear rate.
A plot of viscosity versus shear rate was obtained from the steady shear measurements.
The yield point is the stress of extrapolated to a shear rate of zero.
Viscosity versus shear rate profiles for emulsions with gelation of the internal phase.
You'll also be interested in:
Examples of using Shear
Show more
I am like a shear genius with these scissors
Mineralization is related to sulphides in the shear zones
K shear wave transducers with transducer frequency
Examples of using Rate
Show more
The mortality rate is certainly on the rise
Rate stations and assign audit points
Low literacy rate and school attendance
