Examples of 'shear rates' in a sentence
Meaning of "shear rates"
Shear rates are used to measure the velocity gradient or the rate at which adjacent layers of a substance in motion move relative to each other, causing shear deformation. It is commonly used in the field of fluid dynamics or rheology to describe the amount of deformation or strain occurring in a fluid or material due to applied forces or stresses
How to use "shear rates" in a sentence
Basic
Advanced
shear rates
This corresponds to shear rates in sclerotic arteries.
Viscosity measurements were made at various shear rates.
A higher viscosity at lower shear rates is clearly discerned.
High shear rates are desirable.
The average viscosity at these three shear rates is quoted.
Low shear rates create multilamellar liposomes having multilayered structures.
Viscosity is determined at different shear rates in the following manner.
This involves viscosity testing at relatively low shear rates.
Shear rates in the extruder can vary over a wide range.
This is due to the fact that increasing shear rates.
Shear rates vary depending on the type of shear mode used.
The viscosity of the composition is maintained up to very low shear rates.
The flow and shear rates were constant for all preparations.
Such polymers have a lower melt viscosity at high shear rates.
Higher shear rates provide additional energy to accelerate the aggregation process.
See also
Viscosity dependence concerning magnetic field is investigated for difierent shear rates.
Viscosity at low shear rates tends to influence flow and levelling properties.
Its limitations are that it is valid over only a limited range of shear rates.
These high shear rates are almost impossible to correlate with in vivo conditions.
The ratio will vary depending on the extensional and shear rates.
Gels may flow at higher shear rates due to their shear thinning properties.
The viscosity remains substantially constant through this range of shear rates.
At very high shear rates the grease viscosity may approach the base oil viscosity.
It is found that the latter reduction is especially pronounced at low shear rates.
Viscosity at high shear rates is the most important physical property that influences mould filling.
This made it possible to access particularly low viscosity values and shear rates.
The local strain and shear rates are much greater in fiber production than other processes.
The spraying furthermore makes it possible to prevent strong shear rates on the spraying stage.
However, no specific shear rates are given for this viscosity range.
We studied the viscous response of samples at different bacteria concentrations and different shear rates.
Certain fillers can also increase the viscosity at low shear rates by producing a thixotropic effect.
The final emulsion of the invention is shear stable under a defined range of shear rates.
At all shear rates the average aerodynamic diameter was near 3 micrometers.
Copolymers produced according to this invention also have very high critical shear rates.
Shear rates may be negligible, for example once the material enters a septic tank.
Shear flow test is a rheological testing mode to measure the viscosity at different shear rates.
Specifically, better uniformity means lower shear rates and less chance of localized depletion of oxygen.
The viscosity of the present formulations remains substantially constant over a wide range of shear rates.
At low shear rates deviations from the power-law scaling in the fluidization times were obtained.
Viscosity of these hydrogels can be extremely high at low shear rates Eur.
Viscosity results at the various shear rates for each mix are summarised in Table 4.
The equilibrated sample is measured using a Couette geometry over a range of shear rates.
Figure 6, Platelets obtained from MK exposure to high shear rates can be activated by thrombin.
Stability Even very dilute dispersions of CNF have a very high viscosity at low shear rates.
Figure 4, Ultrastructure of MK exposed to high shear rates leading to platelet formation.
Preferred formulations are pseudoplastic, and demonstrate a decrease in viscosity at low shear rates.
The viscosity measured at low shear rates is indicated as being 45 mPas.
In the venous área as well as with high shear rates e . g.
Shear rates ( Y ) in round channels are expressed by formula IV ; EPMATHMARKEREP where.
Coatings thickened with Hydroxyethyl cellulose have good rheology at various shear rates and have pseudoplasticity.
You'll also be interested in:
Examples of using Rates
Show more
Household borrowing rates have remained steady
Rates of disability and handicap among children
Effects of changes in rates of exchange and inflation
Examples of using Shear
Show more
I am like a shear genius with these scissors
Mineralization is related to sulphides in the shear zones
K shear wave transducers with transducer frequency
