Examples of 'slice thickness' in a sentence
Meaning of "slice thickness"
Slice thickness: Refers to the measurement of the width or thickness of a slice or cut, commonly used in food preparation or medical imaging
How to use "slice thickness" in a sentence
Basic
Advanced
slice thickness
Regulating knob for slice thickness.
The slice thickness regulator should be set to the zero position.
According to the bread slice thickness.
Adjust the slice thickness by turning the thickness control to desired thickness.
Slicer with adjustable slice thickness.
Ct slice thickness.
This is a better solution than increasing the slice thickness.
Irradiated slice thickness.
It represents no technical problems achieving individual fish slice thickness.
Slice thickness can be adjusted by turning the slice thickness regulator counter clockwise.
This control also defines the starting slice thickness to display.
Select the required slice thickness by turning thickness adjusting knob clockwise for thicker slices and.
The settings on the scale do not correspond with the slice thickness in mm.
Blade should be sharpened when slice thickness looks uneven or when the slices look broken.
This can also occur in combination with varying the slice thickness.
See also
Now your customers can choose the slice thickness to suit the style of bread.
Corrected infarct volume was calculated by multiplying the corrected infarct área by slice thickness.
Allowing your customers to choose the slice thickness they want for the type of bread.
The liver volumes were then computed based on the pixel área and slice thickness.
Adjust the slice thickness by turning the Thickness Adjustment Knob to desired.
A lower limit could be determined wherein a further reduction is slice thickness would not be necessary.
If the slice thickness is not correct, adjust the setting.
To match the histological analysis, a slice thickness of 2 mm was used without slice gap.
Individually, the films indicate the imaging plane and slice thickness.
Axial transverse images of 5 mm slice thickness are reconstructed using a standard kernel.
The width of the cross-bar shown in illustrates the slice thickness.
The TrueFISP technique allowed the slice thickness to be reduced from 4 mm to approximately 1 mm.
Slice thickness and table increment were 3 mm and 5 mm, respectively.
The ideal browning level depends on bread type, slice thickness and toasting time.
Note, The slice thickness adjustment scale is not a millimetre scale.
The MSV mode allows multiplanar, sequential slicing, the slice thickness being defined by the operator.
With a reduction of slice thickness or higher field strengths 3T visibility will probably further increase.
The European Society of Pneumology recommends a slice thickness of 1 mm for MDCT.
Imaging resolution, slice thickness and slice positioning were kept identical to absolute T2 MRI acquisition above.
Technical parameters kV, mAs, slice thickness.
Preferably the slice thickness is between 3 and 6 mm.
The liver and spleen are imaged over a 15 minute period, by taking a 5 millimeter slice thickness.
The slice thickness studied was 1mm.
The solid substrate of FIG . 4-A is composed of a single layer 4 for the whole slice thickness.
The slice thickness was 3 mm.
Coronal and axial images were obtained with a 0.65 mm slice thickness.
The gap 12 defines a slice thickness to be cut by the potato chip cutting apparatus 2.
The experimental factors were as follows, potato slice thickness was 2, 4, respectively.
Set the required slice thickness using the control knob 14 see Figure C.
Volume can be calculated by multiplying X-Area by the slice thickness of 1.2 mm.
The slice thickness was 1.5 mm with no slice gaps.
Twelve T2WI coronal images are acquired with a slice thickness of 2 mm gapped at 0.2 mm.
The slice thickness is less than 10 mm, preferably in the range of 3 to 6 mm.
For safety reasons, the slice thickness must be returned to the “ 0 ”.
All patients received coronal proton-density weighted or fat-suppressed T2-weighted images with a slice thickness of 3-4mm.
You'll also be interested in:
Examples of using Slice
Show more
Slice meat across grain in thin slices
Let us do a slice and scan right away
Slice larger strawberries into small pieces
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
