Examples of 'slide cover' in a sentence
Meaning of "slide cover"
This phrase can be interpreted in a few different ways. It could refer to a protective covering that is placed on a slide (playground equipment) to prevent injuries. It could also refer to a cover or sleeve for a slide (presentation tool) used to protect or enhance its appearance
How to use "slide cover" in a sentence
Basic
Advanced
slide cover
Open the slide cover to turnthe camera on.
Remove top cover screws and slide cover off.
Slowly slide cover up and off chassis.
Press on battery compartment cover serrations and slide cover in.
Slide cover panel back onto posts on dispenser.
Place thumbs on notches on front of cover and slide cover forward.
Slide cover off to replace batteries.
To open the battery compartment press at the textured surface and simultaneously slide cover back.
Slide cover straight in a lateral direction until it comes off.
Turning the camera on Open the slide cover.
Open the slide cover all the way until it.
No indicators appear on the LCD panel when the slide cover is opened.
Slide cover assembly down onto the support assembly.
When the camera is not in use, close the slide cover and avoid.
Slide cover into place and reattach to bottom of oven cavity.
See also
Remove the two rear thumb screws, slide cover forward and out.
Slide cover into place and replace two rear thumb screws.
Using thumb, press down on battery cover at arrow and slide cover down.
The slide cover is not fully opened and the power is not on.
Self-Timer mode is automatically canceled also when the slide cover is closed.
A slide cover glass as used in microscopy is simultaneously coated in the same manner.
The slides were then counterstained with Fastred, mounted and topped with a slide cover.
Close the slide cover to turn the camera off when not in use.
To cancel self-timer operation, close the slide cover.
Close the slide cover to turn the camera power off to save battery power.
Pull thread out about 10 cm and replace the slide cover.
Slide cover plates and heater mounting bracket out from top side of heater.
OpenUsing your finger, slide Cover in direction of arrow to open.
Slide cover over the mixer, from back to front.
Such other types of structure may include, for example, a slide cover.
A The slide cover is not completely open.
Such a cassette comprises a minimum of moulded components, namely a tray, a lid, a slide cover and a magnetic puck.
To slide cover off, push up on the raised edge.
The needle assembly arm 43 extends downwardly from the bottom of the needle slide cover 110.
Open the slide cover until it click-stops.
Slide cover into place and re = place two rear thumb screws.
Assembly of the tray 2, slide cover 4 and spring 6 is perfectly simple.
The slide cover and its moulded guide portion are preferably injection-moulded in one piece.
Back slide cover construction facilitated service and repairing work . Rotor may be easily pull.
Open the slide cover tocheck that the letter “ ” is visible on the LCD panel.
Slide the slide cover ( 20 ) to the rear position and switch on the bodypack transmitter.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Slide
Show more
A slide and video presentation not to be missed
Sometimes they slide to the other side
Slide the splitter as far down as it will go
