Examples of 'sliding switch' in a sentence
Meaning of "sliding switch"
sliding switch: refers to a type of switch or control that can be moved or adjusted smoothly along a track or surface to change its state or position
How to use "sliding switch" in a sentence
Basic
Advanced
sliding switch
The sliding switch has three positions.
Temperature and air volume sliding switch.
Using the sliding switch to activate the appliance.
Control panel with sliding switch.
Actuate the sliding switch in the direction of the arrow.
Change the direction with the sliding switch.
Sliding switch for recording operation protects against misoperation.
The slot is suitable for receiving a sliding switch.
Use the sliding switch to select the desired function.
Select cubed or crushed mode by sliding switch on dispenser panel.
Set the sliding switch on the transmitter to automatic mode.
Do not use stainless steel polish on the sliding switch.
Telescopic tube with sliding switch and locking collar.
Sliding switch located on the right or left side of the equipment.
Telescopic tube with sliding switch and accessory connection.
See also
Other forms of switch could also be used such as a toggle switch or a sliding switch.
Telescopic tube with sliding switch but without accessory connection.
Adjust the Recall time via sliding switch.
Use the sliding switch on the cushion to operate the massage cushion.
Open the instrument by pushing the sliding switch to the right.
There is a sliding switch for duplex mode setting for fiber port.
The massage function is switched off by sliding switch back to the middle.
Use the sliding switch on the control panel to start the circulation pump.
Centered on top of the camera is a sliding switch that focuses a projected image.
This sliding switch can be easily recognized from the front and the side.
Operating panel With keypad and sliding switch.
Slide the sliding switch into the required position in order to set the suction power.
Set the chime with the sliding switch OUTPUT.
The sliding switch is set to Fwd.
One non-limiting example is a sliding switch.
Move the sliding switch back to Auto.
Speed changing is carried out by the sliding switch 5.
Use the sliding switch to adjust the Flash time.
In the top right corner, there is a sliding switch.
Set the sliding switch to REV to push back the material.
Switch the tool on / off by way of the sliding switch.
The sliding switch above the MIDI connections on the rear side of the.
Set the CHIDE sliding switch to ON.
Sliding switch PHASE for changing the phase.
If you have thick hair, slide the sliding switch.
When the sliding switch PLAY MODE on the rear of the.
Select the desired operating mode by pushing the sliding switch 7.
Set the sliding switch to Auto or Fwd.
To switch on the supplied microphone, set its sliding switch to the upper position.
Move the sliding switch to Auto Automatic operation.
The pin configuration of the jack depends on the position of the sliding switch 6.
The clippers also have a sliding switch 2 for fine adjustment of the cutting length.
The acoustic signal can be muted by operating the sliding switch on the rear-side.
Slide the sliding switch 2 to finely adjust the cutting length to the desired value.
To mute a microphone during operation, set the sliding switch to its center position.
You'll also be interested in:
Examples of using Sliding
Show more
All sliding parts and bearing points
Jack have no trouble sliding down beanstalk
Sliding off it and spin around to face me
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
