Examples of 'solder joint' in a sentence
Meaning of "solder joint"
solder joint: A solder joint is a connection between two electronic components or wires made by melting and flowing solder into the joint to create an electrical and mechanical bond
How to use "solder joint" in a sentence
Basic
Advanced
solder joint
A solder joint has good thermal conductivity.
Brass gate valve with solder joint.
A good solder joint should gleam like chrome.
The presence of antimony is typically strengthens solder joint.
If using a solder joint instead of a compression.
How to get a clean solder joint.
Solder joint failure by creep fatigue or intermetallics cracks.
Plastic deformation is essentially the same as a solder joint.
The solder joint is obtained conventionally by means of solder.
It always has turned out to be a cold solder joint.
Solder joint formed by solar power.
Voids and pores in the solder joint on the track.
A good solder joint starts with a tight mechanical connection.
The connection may be made using a weld or solder joint.
Clean the solder joint immediately.
See also
Pick a tip that allows good access to the solder joint.
Eventually the solder joint was exposed and attacked.
Keep feeding in solder until the entire solder joint is covered.
A simple solder joint is sufficient.
Guide the soldering tip to the solder joint and heat it.
A good solder joint will last the lifetime of the product.
Apply solder directly to the solder joint and not on the.
This also produces hard stress transmission points at the solder joint.
The quality of the solder joint is thus substantially degraded.
A low injection pressure does not stress a fragile solder joint.
Cold solder joint.
Rusty and dirty surfaces reduce heat transfer to the solder joint.
This showed that the solder joint had a sufficient strength.
These models are often used when trying to assess solder joint reliability.
A solder joint may either be made with soft solder or with hard solder.
Push shrink hose over the solder joint and slightly heat up.
Pick a tip that maximizes contact area between the tip and solder joint.
Even a single bad component or solder joint could render the entire module inoperative.
One of the most critical elements of an electronic assembly is the solder joint interconnection.
The typical failure of a solder joint due to electromigration will occur at the cathode side.
A uniform black finish is made with patina on the solder joint to prevent tarnishing.
The solder joint according to this invention includes an electrode and the solder joined portion.
We have always been the leading company in providing highest solder joint inspection capability.
The solder joint is thereby . protected from damage.
This will often result in a more consistent solder joint for small parts.
A solder joint having the alloy composition according to claim 1.
The bond material touches the solder joint and reduces the solder mismatch.
This will keep oxidized solder or scorched fl ux residue away from the solder joint.
The basic inspection concept in the solder joint inspection is called SJI in Omron.
When I was in school this was my favorite solder joint.
However, any single solder joint failure results in a failed system.
IMC simply meaning that you will walk away with the least robust solder joint connection.
A guidewire solder joint was aligned about 1 mm distal to the end of the balloon taper.
It liquifies when heated, which causes it to spread over the solder joint.
In the system described above, only one solder joint would be inspected at a time.
You'll also be interested in:
Examples of using Solder
Show more
Do not solder directly onto the battery
We just need the silver for solder
Impurities in the solder or on the surfaces to be soldered
Examples of using Joint
Show more
Joint investigation with other investigative bodies
Cooperative and joint activities of the conventions
Joint operations and investigations are being conducted frequently
