Examples of 'solder joints' in a sentence
Meaning of "solder joints"
Solder joints: These are the points where two or more metal components are joined together using soldering techniques, commonly used in electronics and metalwork
How to use "solder joints" in a sentence
Basic
Advanced
solder joints
The solder joints must not be damaged by vibrations.
Two landings of two solder joints are not wetted.
Solder joints are commonly used for joining conductors.
This may damage or break internal solder joints.
Four solder joints are connected by solder bridges.
Too low soldering temperatures lead to cold solder joints.
Voids in solder joints are a concern for many electronic manufacturers.
Thermomechanical analysis on solder joints.
The solder joints are then cleaned with warm soapy water.
This can lead to increased fatigue of the solder joints.
The solder joints must always be clean and free of grease.
The device is particularly suited for testing solder joints.
Perfect solder joints.
The final result is a general model for the IMCformation in solder joints.
Blasting holes or cold solder joints are seen after soldering operations.
See also
This covers all possible surfaces and begins to form solder joints.
Optical inspection system for solder joints and inspection method.
All solder joints should be made before joining pipe to the filter head.
Mechanical and thermomechanical properties of solder joints in cellular phone environment.
This helps you decide which tip to use to obtain the best quality solder joints.
The dissolving parts also cause solder joints that are less stable.
The image shows one solder bridge and several open solder joints.
Human visual inspection of solder joints on printed circuit boards can be very subjective.
Optical inspection can not achieve this because the solder joints are not visible.
Good solder joints were formed between all leads and the appropriate circuit board conductive path.
Microsectioning of solder joints.
The SAC solder joints have a dynamic microstructure which evolve excessively under different aging conditions.
According to the invention at least one of the solder joints will be ultrasonically soldered.
Effect of electromigration on the mechanical and thermo-mechanical reliability of solder joints.
What kind of solder joints can be inspected automatically?
This thus seals both the busbars and the solder joints of the cables.
Joints other than solder joints may be used, provided that said joints are electrically conductive.
Thus, the life of the motor windings and solder joints are prolonged.
Low-quality solder joints on the MCU pins can result in unpredictable MCU behavior.
Recrystallization of lead-free solder joints under mechanical load.
Those joints that fasten the shim 10 have been exemplified above as solder joints.
Inadequate or damaged cables, solder joints or corroded connectors can.
However, if the surface is not sufficiently clean, unreliable solder joints result.
After allowing the repaired solder joints to cool, test the port in question.
Consequently, requirements on the strength and fatigue resistance of solder joints are heightened.
In addition, the number of solder joints on each PCB continues to rise.
In this way, the occurrence of undesired solder bridges between solder joints can be avoided.
Good metallurgical solder joints require a " clean " surface.
Area gives the most efficient heat transfer, producing high quality solder joints quickly.
Such a method makes low-cost inspection of the solder joints of the microelectromechanical system assembly possible.
Maximizing contact area gives the most efficient heat transfer, producing high quality solder joints quickly.
Do not solder joints within 6 " of bypass or drain line fitting.
The results indicated that DC current aging improved the thermo-mechanical reliability of solder joints.
First, a variety of soldering problems Symptom, cold solder joints or solder joints have blasting holes.
The resulting solder joints after reflow 118 soldering are free of voids.
You'll also be interested in:
Examples of using Solder
Show more
Do not solder directly onto the battery
We just need the silver for solder
Impurities in the solder or on the surfaces to be soldered
Examples of using Joints
Show more
We smoke a couple joints and forget everything
Joints shall be well aligned and adjusted
Elimination of deck joints and deck drains
