Examples of 'speed screw' in a sentence
Meaning of "speed screw"
speed screw - Refers to a device or tool used to adjust or control the speed of a mechanism or process
How to use "speed screw" in a sentence
Basic
Advanced
speed screw
Only the idle speed screw is adjustable.
Improved part load performance of variable speed screw compressor.
Idle speed screw on carburetor requires adjustment.
Due to the elaborate optimization engine speed screw emits significantly less noise.
Idle speed screw on carburetor needs adjustment.
Check the condition of the air filter before adjusting the idle speed screw.
Turn idle speed screw counterclockwise to decrease.
N Carry out the standard setting without disturbing the high speed screw H.
Turn idle speed screw clockwise to increase idle speed.
N Carry out standard setting on low speed screw I.
High speed screw and low speed screw with slotted head.
Product material is delivered from the sigma blades to a variable speed screw ( not shown ).
Turn idle speed screw clockwise to increase engine speed if engine stalls or dies.
Erratic idling behavior, poor acceleration even though standard setting of low speed screw is correct.
S Turn idle speed screw counterclockwise to decrease engine speed.
See also
Chain runs when engine is idling, Turn the idle speed screw LA.
S Turn idle speed screw clockwise to increaseenginespeed if enginestalls or dies.
Vacuum filling machine 10 heads high speed screw c.
If the high speed screw on the carburetor is improperly adjusted, hunting may occur.
CombiTool moves when engine is idling, Turn idle speed screw ( LA ) counter.
High speed screw and low speed screw with special head - without slotted head.
Carburettor requires adjustment Turn idle speed screw “ t ” counter clockwise to idle speed . to decrease speed.
The high speed screw alters the engine 's power output and the maximum off-load engine speed.
Erratic idling behavior, poor acceleration, Turn the idle speed screw ID.
N Turn the idle speed screw ( LA ) slowly counterclockwise until the cutting attachment stops moving.
Erratic idling behavior, poor acceleration even though low speed screw is open 1/4 turn.
N Turn the low speed screw ( L ) slowly clockwise until the engine runs and accelerates smoothly.
Chain runs when engine is idling, open low speed screw ( I ) one.
Turn the idle speed screw in ( clockwise ) to increase the engine idle speed.
Erratic idling behavior, Turn low speed screw ( I ) clockwise.
Turn idle speed screw ( B ) clockwise to increase idle speed.
N Carefully turn the low speed screw ( L ) down onto its seat clockwise.
Turn idle speed screw clockwise to increase idle speed . Fig . 11.
N Carefully turn the low speed screw ( I ) down onto its seat clockwise.
Turn idle speed screw counterclockwise to reduce at idle speed . adjustment . idle speed Fig . 25.
S Turn idle speed screw ( T ) clockwise to in.
Turn idle speed screw ( C ) clockwise to increase idle speed.
S Turn idle speed screw (T) clockwise to increase engine speed.
N Turn the low speed screw ( L ) gently clockwise until it is firmly in its seat.
Adjust the lidling speed screw to set the engine at speed If abort 1800 rpm.
To set low speed screw ( I ), close screw ( I ) turning it clockwise without forcing.
N Turn the high speed screw ( H ) counterclockwise as far as stop no more than 3/4 turn.
You'll also be interested in:
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
