Examples of 'spindle nut' in a sentence
Meaning of "spindle nut"
spindle nut: a type of nut used in mechanical devices or machinery to secure a spindle in place
How to use "spindle nut" in a sentence
Basic
Advanced
spindle nut
Replace outer fl ange and spindle nut.
Remove the spindle nut and outer flange.
An inner tube is secured to the spindle nut.
The threaded spindle nut has one or more thread turns.
Do not over tighten spindle nut.
The threaded spindle nut thrusts against the base block.
This type of linear actuator comprises a spindle with a spindle nut.
A spindle with an associated spindle nut is a central element of these actuators.
Another form of end stops is a mechanical stop for the spindle nut.
Installation of a spindle nut at the end of the shaft to hold the hub.
This step allows more freedom in removing spindle nut and washers.
Start threading on spindle nut which will self align outer clamp washer.
Secure into place by reversing the outer flange and tightening the spindle nut.
Check play after torquing spindle nut and replacing damaged shear pins.
The spindle nut performs the critical function of retaining the hub assembly on the spindle.
See also
In case of stiffness of movement the spindle and spindle nut must be relubricated immediately.
A novel spindle nut assembly is presented below specifically designed to resist loss of preload compression.
The support does not move freely Too much friction between the spindle and spindle nut.
In the opposite end of the spindle nut the inner tube comprises a front mounting.
At particularly low spindle pitches, it is however often the spindle nut which becomes worn.
In another embodiment, the spindle nut is coupled to the side of a separate gear wheel.
The intermediate section 27 is not provided for rolling engagement with the spindle nut.
Risk of damage to the spindle, spindle nut and gear unit.
To prevent spindle nut counter-rotation, the spindle nut assembly employs a number of interlocking components.
In the case of stiffness, the spindle and spindle nut must be relubricated immediately.
Tighten the spindle nut only enough to hold the wheel firmly without over-tightening.
A safety nut will, when the actual spindle nut is worn down assume the load.
An electromagnetic coupling 5 known per se surrounds a first end of the spindle nut 4F.
Use supplied wrench to unscrew the spindle nut 9 and remove or mount accessories.
A spindle nut 1 is arranged on a threaded spindle 2.
The sensors then drive special servo motors, which have a spindle nut or a ball screw.
The spindle nut 40 may be secured against rotation.
The threaded spindle 53 interacts with the threaded spindle nut.
The spindle nut 41 is designed as a bushing with internal threads.
The travelling part 26 can be implemented as a spindle nut to cooperate with the spindle 25.
The spindle nut may be, for example, a so-called roller nut or a ball nut.
The rotational motion of the ball screw 18 is converted into a linear motion of a spindle nut 21.
Between the spindle nut 1 and the threaded spindle 2, planets 3 distributed over the periphery are arranged.
Fig . 3 is a 3D drawing showing electrode storage device and spindle nut.
They move with the spindle nut 21 and are guided in the plate 56.
A gearwheel 8A meshes with the external gearwheel 4I fixed to the spindle nut 4F.
The spindle 9 is in mesh with a spindle nut ( not shown ) in the chain unit 5.
A spindle nut 12 slides on the spindle 11 and forms a connection with the inner tube 4.
A coupling part 5A with an electromagnet 5B is attached to the spindle nut 4F and rotates therewith.
You'll also be interested in:
Examples of using Spindle
Show more
For main spindle drives on machine tools
The valves have an external spindle thread
Spindle probing software functionality comparison chart
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
