Examples of 'switch lever' in a sentence
Meaning of "switch lever"
switch lever: this phrase refers to a device or mechanism used to control or activate something, typically by operating a lever or switch. It is often used in the context of electrical or mechanical systems, where a lever is used to toggle power on or off, or to change the operation of a device.
How to use "switch lever" in a sentence
Basic
Advanced
switch lever
Release the switch lever to turn it off.
Press and hold rear switch lever.
Release switch lever to turn mower off.
Shaping discsDisc holder safety switch lever.
Release the switch lever to stop.
Be sure the bail handle or switch lever.
Release the switch lever to stop the motor.
Stop and release the switch lever.
Move the switch lever downward.
Disc holder safety switch lever.
Depress the switch lever and release it again.
Rear handle with switch lever.
Pull the switch lever to light up the lamp.
To stop your mower release the switch lever.
Moving the switch lever up selects high speed.
See also
To switch on your trimmer press the switch lever.
Pull the switch lever toward you while pressing.
Short time after releasing the switch lever.
Move the reversing switch lever to the neutral position.
Machine speed is increased by increasing pressure on the switch lever.
To play chassis switch lever eight.
These are positioned on each side of the pan switch lever.
Be sure the switch lever is released and the blade.
The depress the front of the switch lever to lock it.
Pull the switch lever toward you while depressing.
Mower does not run when switch lever is activated.
Let the switch lever snap into position using spring.
Always set the reversing switch lever to the neutral.
Tip the switch lever against the spring pressure to the.
Samsung opening switch lever.
Depress the switch lever and hold it in that position.
The tool stops when you release the switch lever.
You can use the switch lever or trigger according to.
Grab the upper handle and pull the switch lever.
Moving the switch lever down selects low speed.
The lamp keeps on lighting while the switch lever is being pulled.
Swing the switch lever into the desired position.
The spindle stops rotating immediately after releasing the switch lever.
Push the mode switch lever to the desired position.
The cultivator blade does not rotate even pulling the switch lever.
Do not pull the switch lever hard without the key.
Switch lever can be pulled from either top or back side of the tool.
Use the reversing switch lever only after the machine.
Your mower will continue to operate whilst you are pulling the switch lever.
Failure of the switch lever to operate properly can result in injury.
The mower will continue to run until you release the switch lever.
Release the switch lever and remove the safety key.
Your mower will continue to operate whilst you are pressing the switch lever.
Push the docking switch lever back until it clicks into place.
Tighten jam nut to secure adjustment and reconnect rod end to switch lever.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
