Examples of 'tamper switch' in a sentence
Meaning of "tamper switch"
tamper switch - a device that is designed to trigger an alarm or response when unauthorized interference or tampering occurs
How to use "tamper switch" in a sentence
Basic
Advanced
tamper switch
It is also possible to install a tamper switch not included.
Hold the tamper switch closed before plugging the battery in.
Tamper monitoring of transmitter and receiver by front tamper switch.
On the circuit board a tamper switch secures the box.
Large metal enclosure with white coatig and tamper switch.
A screw must be installed in the tamper switch portion of the backplate.
A single tamper switch capable of interconnecting with multiple tamper posts is preferred.
There is a tamper switch.
This is the tamper switch output for the connection of an external alarm system.
Jumper, for disabling the back tamper switch.
The outdoor siren tamper switch can be enabled and disabled remotely.
Those feed the detonator, but they have been rigged with a tamper switch.
The rear tamper switch must be sealed for the system to work correctly.
When the unit is mounted on unlebel wall, back tamper switch could be kept turninig on.
The wall tamper switch must remain closed when the outdoor siren is mounted.
See also
In addition, it monitors the case and wall tamper switch states, and the battery state.
The wall tamper switch must remain closed when the indoor siren is mounted.
EKB3 comes equipped with a built-in tamper switch intended for enclosure supervision.
The front tamper switch issues a signal when the cover is detached from the unit.
EWKB4 comes equipped with a builtin tamper switch intended for enclosure supervision.
The Tamper switch protects the enclosure against unauthorized opening or sabotage.
The microwave sensor shall have a tamper switch that protects unauthorized removal of the radome.
The tamper switch contact is closed with the detector 's front cover secured on the box.
To use the keypad tamper, insert the tamper switch supplied into the opening located in.
If the Tamper switch on the control panel is triggered, yellow LED will light.
Note, The door camera has a built in tamper switch to help prevent theft.
Remove the tamper switch wire or only the wire if tamper switch is not used.
For loop 2 and / or loop 3, program an appropriate zone and enroll using the tamper switch.
Activate the sensor 's tamper switch or if you used the quick install.
Tamper switch 22 includes two parts that are movable relative to each other.
Figure 17 illustrates a sectional view of the tamper switch shown with an extension plate mounted thereon ;.
OFF tamper switch active, ON override tamper switch tamper OFF.
To restart the 10 minute period, operate the tamper switch by opening and closing the cover.
It will take us hours to bypass . Sir, it 's protected by a tamper switch.
The pry-off tamper switch is integrated in the PCB, which is acti.
And it will take us hours to bypass. Sir, it's protected by a tamper switch.
EWF1/EWF1CO comes equipped with a built-in tamper switch intended for enclosure supervision.
The tamper switch must not be pressed . 4 . The LED will flash when 5 seconds has elapsed.
Figure 5 is a perspective view of the enclosure of the tamper switch arrangement of Figure 1 ;.
The trouble terminal 158 may be connected to a fault detection subsystem ( not shown ) or a tamper switch.
Once the enclosure of EKB3 is tampered, the tamper switch will become triggered.
Once the enclosure of EWP3 is tampered, the tamper switch will become triggered.
DIS-TAMP2 Pins for back tamper switch management.
Sir, it 's protected by a tamper switch.
When the panel is on the bracket or the stand the tamper switch [ 16 ] is depressed.
You'll also be interested in:
Examples of using Tamper
Show more
Do not tamper with throttle stop lock
It is severely forbidden to tamper with the mechanical
Never tamper with the pressure indicator
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position